Sunday, November 19, 2017

Going on a Paleo Diet

The highlight of the evening was Allen's spirited, but ultimately unsuccessful, battle with a sabretooth tiger
Keith has always has a penchant for the prehistoric, staging dinosaur hunt games for us over the years. With the release of Ganesha Games Paleo Diet: Eat or Be Eaten rules, he set up a game where we take on the role of cavemen from the same tribe on a hunt, trying to bring home the bacon. Each of us had 3 hunters and a hound, and we were dispersed around the table. Various giant and herd grazers were scattered across the table, along with 3 predators -- a pack of wolves, a giant weasel, and a sabretooth tiger.
My hunters -- two with spear and one with bow -- set out with our trusty hound to hunt some really big game
As it turned out, only the sabretooth got into the game. Keith's hunters fled from the wolves, and the weasel took one look at the firebrand that Joel's hunters were carrying and ducked off the table. Allen, who loves to see how things work in a game and will do things that are unwise on the face of it -- just to see what happens, moved his band to attack the sabretooth. I decided to go for easier kills, and climbed a steep hill to stalk a family of Macrauchenias -- which looked to me like a cross between a giraffe and a tapir. There were six of us players, and we all set out after the animals once the game began.
My hunters close in on a family of Macrauchenias, targeting the young one in the center
Paleo Diet has a clever game mechanism in which the animals activate either when players do certain triggers (such as moving within a certain distance, pelting them with arrows or spears, bringing fire within a Long distance, etc.). They also react on activation failures by the players figures. I proved my dominance at bad die rolling, once again. Deep into the game, I had managed to roll more "1's" than the other five numbers on the dice combined!
First kill! Our hound brings down the young one (don't be sad -- no actual animals were harmed in the staging of this game)
This led to a somewhat frustrating part of the game of closing with animals only to have them amble away. Luckily, we had surrounded the board, and pushing a herd away from you meant that they were coming closer to another one of us. I managed to close in on the Macrawhatevers and my dog brought down a baby one. Meat for the campfire tonight! This panicked the parents who fled further up the forested slope. With my horrible movement rolls, I knew I'd never catch them. So, I turned around to go for a herd of giant tapirs who had fled from other hunters to a position within range of my hunters.
Stampeding animals create a traffic jam as our hunters spooked them, making herds run back and forth across the board
Meanwhile, Allen bravely closed in on the sabretooth and engaged it in melee. He caused one wound on it, but had a hunter wounded, too, in the exchange. The sabretooth roared (causing morale checks) which caused most of his hunters -- except for the wounded one, oops -- back off. That unfortunate act of bravery doomed him and there was one less mouth to feed in our tribe. At this point, Allen decided the herbivores tasted better, anyway, and switched targets.
Six hunter bands meant for a slower-moving game than would probably be normal
It was a fun game, and could EASILY be played solo. The animals react entirely by rolling a table and triggers by the players. The game did move a little slow with six players (and each of us having 3 hunters and a hound). However, smaller groups or fewer players would solve that. Of course, a little less poor rolling (fewer activation failures) might make it go faster, too! Still, we killed a tapir, a couple macarenas, and one other beastie that I forget about. A fun evening, channeling our distant ancestors and their attempts to hunt enough to keep from starving, all the while eluding those that would eat us!
Another herd of animals flees towards us, providing my band with fresh targets

Wednesday, November 15, 2017

Frostgrave: A New Project

The rules
Well, I enjoyed my game of Frostgrave: Ghost Archipelago enough to rush out and buy the rules. I pitched the idea to the Sunday Night gaming crew and received an enthusiastic enough response. They even gave a thumbs up to using the Splintered Light Miniatures anthropomorphic Woodland creatures as warbands. You never know -- some gamers may not want the characters they're controlling to be bears, badgers, wolverines, raccoons, and so on! I dug through my SLM unpainted lead (and there's a LOT of it), and picked out about 30 miniatures to paint up.
Some of my previously-painted Splintered Light Miniatures animals -- two bears and two wolverines
Readers of my blog know I've been painting SLM figs for awhile. Originally, I used the for armies for Hordes of the Things (HOTT) rules. However, HOTT has petered out here, dying alongside DBA Ancients -- which we played for more than two decades. Lately, I've been painting more of the animals up for my own set of big battle fantasy miniatures rules. However, all along, the leader figures for these armies I'd decided to base up individually. In the back of my mind was another project using these individually based figures.
SLM frogs -- not sure whether to keep these guys as opposition forces for the players, or offer them up as a force
Well, along comes Frostgrave: Ghost Archipelago and now I have a definite need for these individually based figs! Since my Sunday night crew is rather large (we have 5-8 players regularly), I worry that a normal 10-figures Frostgrave force might lead to really long games. My plan is to shrink down the size of the forces, though I may paint them up initially as 10-figure just in case.
Jungle Rats - my first force that will be offered up to my players
Anyway, here's my first force from my previously-painted figures: The Jungle Rats. The dark rat in the front left will be the Heritor, or magically powered leader of the force. The white rat in the middle is his Warden -- you can tell he's a shaman by the skull on the end of his staff, of course! The remaining five will be choices for the player to field. The blowgun armed rats will likely count as "Bows" -- I know, I know. Shouldn't have as much range as a bow, but this IS a fantasy world, isn't it?

Other warbands coming up include the Pine Martens, Badgers, Satyrs, and more...!

Saturday, November 11, 2017

Trying Out Frostgrave: Ghost Archipelago

The board -- which feature my temples and Jeff's plants, along with Steve's Saga Dark Ages figs
I had been seeing lots of posts on the Lead Adventure Forum, as well as on Facebook, about the Frostgrave rules. From what I could gather, it was a set of fantasy skirmish rules with a strong campaign and a bit of role-playing element. Each player controlled a wizard and his band of hirelings searching for magical treasures in a frozen city. It sounded interesting, and I had been wanting to try the rules out to see if the game was fun.
My Heritor in the bear-skin cloak, leads some of his followers towards the temple ring in the distance
So, when Steve P invited me over to his house to play a game, I jumped at the chance. Steve had played in my Beaver Wars playtest, and I had known his friend Jeff for a long time. When he emailed requesting we bring jungle terrain and dinosaurs and other assorted, appropriate monsters, I scratched my head a bit. I thought that, well, maybe he doesn't have any winter or ice terrain and was going to set it in a jungle. When I arrived, I discovered that there is a spin-off edition called Frostgrave: Ghost Archipelago, and that was what he was running.
Jeff and Steve spent much of the game attacking each other, which made things easier on my group
I expected Steve to have our wizard and bands of hired fighters chosen up beforehand. He didn't, though, saying he wanted us to experience that aspect of the game, too -- choosing your wizard's band. It also turned out that the game itself has changed in this edition. Your leader is called a Heritor (not a wizard), and has developed innate abilities. We could choose any 5 abilities from a list of 40. So, no longer does your leader choose one of the 10 schools of magic as in the original Frostgrave rules. Everyone also has a Warden -- the equivalent, I guess -- of the Apprentices in the original. However, I found my Warden to be every bit as tough as my Heritor. With these, you do have to choose from among five types of Wardens. You select 3 spells from that type, and any one from another type's list. I chose a Beastmaster, of sorts.
Two archers of my force, guarded by an infatntryman, line up shots against the enemy in the distance
Next, you finish out your force of 10 figures by purchasing 8 fighters to round out your band. You get 250 gold pieces to hire them. I choose 3 archers, 2 infantrymen, and rounded out my force with 3 "free" standard fighters. I did not pick any of the more expensive types, such as Hunters or Guides, wanting to minimize the learning curve.
The central ring of raptor eggs quickly became a hotbed of action
Steve had selected a scenario from the book where we blunder upon a circle of dinosaur eggs. We placed the 6 treasures -- half of which had to be within the ring of dino eggs. Every turn, there was a 25% chance 3 of the eggs would open up, releasing baby T-Rexes (raptors, in this game). We entered from three of the board edges and quickly advanced towards the middle of the board where the eggs were. I split my force up to go around a small temple in front of my force. I immediately used my Heritor to "Wraith Walk" through the back wall and inside where he picked up the first treasure of the game. Jeff and Steve's forces began exchanging bowfire quickly, and began to draw blood.
My Beastmaster Warden took control of the raptors mentally, and sent them after Jeff's force, where they began to chew up his hirelings
I caught on quickly with how combat worked. Each player essentially adds the roll of a  d20 to their Fighting bonus, along with some tactical factors. Shooters add their shooting bonus, with the targets adding for cover. This opposed die roll mechanic becomes deadly when you consider you are using d20s. A swing of opposed rolls of 20 vs. 1 is probably going to kill all but the Helitor and Warden, who will be grievously wounded. This is mitigated by the fact that most characters have an armor rating of 10-12 or so, which is then subtracted from the winners total roll in the opposed die roll. Nothing happens to the winner -- only the loser takes damage.
Two more of my hirelings investigate a brick temple for treasure
When the first raptor eggs began hatching, I used my Beastmaster Warden to take control of the vicious saurians and move them into contact with Jeff and Steve's figures. Earlier, I'd summoned an animal, but rolled only a Mountain Goat. Since none of us had brought goat figures, I pulled out a Komodo Dragon figure, who bravely pranced into battle alongside my hirelings. When raptors hatched next to my figures and things began to look grim, the goat/dragon charged into them, and over the course of several turns, killed both raptors menacing my figures. Go, go goats!
The dice eventually fell against me, and two more raptors woke up next to my troops. The Komodo dragon bravely charged and killed one, then followed up on the other
In addition to snatching the first treasure token, I did fairly well in picking up other ones. I even snatched the Major Treasure token from the middle of the Dino Egg circle and was able to get it to my side. When we called the game, my force had four of the six tokens under control or off our board edge. It was a smashing victory for my guys. Having never played the game before, I do not claim to be a savant or anything. I know I had very fortunate die rolls at times, and Steve and Jeff attacked each other mercilessly. Whether it was my use of cover or their blood-grudges against each other, my troops took little fire or attacks from my enemies.
The chaos of the late game phase of the battle
All in all, I like the game and think it will make a nice addition to our regular Sunday night gaming. However, I think 10 figures per side will simply be too much for a game involved six-plus players. I read up on it some, but likely whittle down the forces. Speaking of which, I was thinking that this could be a place I could use my individually-based, Splintered Light Miniatures anthropomorphic animals. They're pretty much 20mm, and fit with the whole forest-jungle world. I could call it "Furgrave," for the heck of it!  They have wizard figures and a big variety of fighters. I already have a number of factions painted up (savage jungle rats, frog-men, giant bears and wolverines, and more).  I was excited enough by the idea to go out and buy the rulebook at a local gamestore that same evening. So, look for me to be painting and posting pictures of more Splinted Light animales I'm painting!


Wednesday, November 8, 2017

Blast from the Past: Celtic Monastery (Part 2)

My scratch-built 28mm Celtic monastery with finished beehive huts and church
So, I wasn't quite done with the beehive monks huts on the last update. I still had to paint the doors, and then I found one other things I felt needed to be accomplished. The doors were easy, though. I did a base coat of black, then two dry brushes -- one of Camo Brown and the other Colonial Khaki. I used Howard Hues acrylics for my drybrushing because they are such thick paints. I followed that up with painting the clay rings that would be the cut stone base. I coated them black, did a dark gray wet brush and a final Rebel Gray dry brush. I wasn't sure if I'd made deep enough grooves in the air dry clay to be picked up with dry brushing, but I'm pretty happy with how they turned out.
The finished beehive monk huts for my Celtic monastery
However, when I set the huts on top of the rings, something just didn't look right. Sure, they fit like a glove -- better than I was hoping, actually. I'd thought I was going to have to do some kind of magnet inset into the clay ring or similar to hold them down. The door as the notch and the clay ring doorway as the groove worked perfect. What didn't look right was the two different tones between the cut stone foundations (Hirst Arts block and the air dry clay ring) and the dry stone walls and roofs (Woodland Scenics coarse gravel blended gray). Even though I'd added a dark wash to "blend" it all together, I still thought the differences in tone were too noticeable.

So, I decided to use the same Rebel Gray dry brush highlighting that I did on the cut stone work on the dry stone. I really liked how it tied the look all together. It was the final touch that made it appear like it all belonged together.
The flocking begins...the first layer of medium ballast
The last step will be the flocking. In the above picture, you can see stage one of my flocking. I painted the entire surface with a mix of white glue, water, and earth red paint. While it was still wet, I poured Woodland Scenics medium ballast over it. This smooths out the different levels a bit and roughs up the ground texture. Next up, I paint the ballast with the same water, glue, paint mixture and sprinkle on sand.
My scratch-built 28mm Celtic monastery with finished beehive huts and church
I'm thinking I need to come up with a new method to flock large terrain pieces. My "new" method of applying ballast, sand, and then grass and shrubs is fine when I do something small. However, it takes a l-o-n-g time for 9"x12" areas. The bigger the piece, the more unwieldy it is when you're pouring the various flocking onto the base and not trying to spill it all over the desk. I have a large plastic tub I keep beneath the piece while I do this, but it is still a pain. Maybe I need to go back to trying Liquitex modeling paste for bigger pieces. We'll see.
View from above of the sand and turf flocking
As you can tell from the above soul-searching, stage two of the flocking of the Celtic monastery was frustrating. I think the end result looks okay, but it took more than an hour to do this. Maybe I just need a bigger brush or a new technique or two, but I am not looking forward to stage three! I also noticed that the sand appeared lighter colored because I did not have a solid earth red color on the base. I should have added in this step and hand-painted the ground that color. My mix of glue, paint and water was obviously not opaque and dark enough to provide the customary darker, earth-reddish color that it does on my miniature bases. To fix the lighter tone, I sprinkled quite a bit of Woodland Scenics brown "turf" over it to darken it down. That, mixed with stage three's grass should do the trick. I guess I just have to realize that doing things like this is a learning process. All the more reason to be doing a tutorial, eh? Maybe my missteps will help others doing similar projects.

Anyway, I'll let stage two dry for awhile, then spray it with dullcoate. After it dries, I'll add the grass either later tonight or tomorrow.
Close up of the upper area of the monastery
So, did I screw up the end game? Look at the photos, and you be the judge. I was actually happy (if not giddy) with how the monastery came out until I saw the photos. I think I really messed up the flocking. At the last minute, I decided it would look cool to have gravel or stones peeking through on the dirt path leading amongst the beehive huts and up the slope to the church. I put them on top of the flocking, and then didn't bother toning them down with a wash. I thought I could fix it by simply sprinkling a layer of Woodland Scenics "Turf" over it. When the gravel was still was too glaringly bright, I put another layer. And then when I dullcoated the whole thing, that flocking blew up and dusted the door of the church. It doesn't show up as much in person, but it sure does in the close ups of these photos.
The interior of the church of my scratch-built 28mm Celtic monastery
No, I'm not going to hurl it against the wall. However, I am rating this build beneath the graveyard and well below the Saxon church. A disappointing end to something I invested craploads of time on. I've learned my lesson to not rush things, and most of all, not be lazy and skip steps.
Another view of the Celtic monastery
The beehive huts of my Celtic monastery

The images of the saints I used for the walls (downloaded from various images on the internet and resized)
 Author's Note: Okay, here I am, years later, thinking I have no idea why I considered this a disappointing end to the build. I think it looks nice. My apologies for whatever snit I was in as I finished it that caused me to leave out description of the painting the interior of the chapel. I hope you enjoyed the step-by-step description of how I built this...!





















Tuesday, November 7, 2017

Blast from the past: Celtic Monastery (Part 1)

My scratch-built 28mm Celtic monastery with finished beehive huts and church
Knowing that one day my original Lead Legionaries website will disappear, I'm reposting some of the better content onto this blog. Hopefully, it will not go the way of the dinosaur, too -- or at least, anytime soon! Here is part one of the scratch-build of my 28mm Celtic Monastery.
Work in progress shot of my 28mm Celtic Monastery for my Dark Age skirmish games
My next big scratch-built terrain piece for my 28mm Dark Ages skirmish games is a Celtic monastery. Although I drew inspiration from the UNESCO World Heritage site of Skellig Michael, this is a much, much scaled down version. In fact, after starting it, I scaled it back even further from my original plans. I like to fit my terrain pieces on wooden plaques that are no more than 12" wide or so. Once I started sketching this one out on the plaque, I realized what I would be creating would be way too big and unwieldy. 
Soft wooden plaque from the local craft store as a base for the monastery
So, as I often do, I began with a soft, wooden plaque from the local craft store. This one is about 9" wide by 12" long. I used a box cutter knife to carve a slope all around the edges. I like to use these because not only are they cheap (about $1), but they also are sturdy enough for a heavy piece of scenery. Plus, many important buildings during the Dark Ages would be built on rises or small hills. The plaque gives it some visual heft above the battlefield.
Insulation foam carved to create the upper tier of the monastery
I wanted the monastery to be divided into an upper section and a lower section. So, I grabbed a section of insulation foam and measured it out to fit. Then I used a sharp Xacto knife to carve a slope all around it, like I did with the plaque. I also carved out a gradual slope as a kind of ramp where it will join up with the lower level.  Yes, I know a wire cutter would be much easier, provide a cleaner cut, and look nicer. However, I am very leery about starting down the road of using toxic tools. The chemicals given off in the air when cutting foam frankly scare me. I know I could use a mask and all, but I'm going to flock it extensively anyway. So, my rough and ragged cuts will be covered up in the final product.

Holes drilled into the wooden plaque to help hold the foam upper level in place
To secure the foam to the plaque I drilled a half dozen holes with my pin vice. I then tacky glued in straight pins. I trimmed off the tops when dry and liberally coated the surface of the plaque where the foam would go with tacky glue. The foam piece was pushed onto the pins, which help hold it in place not only while it is drying, but make the bond stronger.
Hirts Arts rocks line the ledge between the upper and lower levels. Also thin "craft foam" was glued down as a surface for both levels
Next, I took some leftover rocks from the Hirst Arts molds I used to build my Saxon church and Pictish broch. My friend Zeke cast these up for me years ago, and I have found many uses for them. I trimmed up the foam to insert the rock pieces into the edge of it so there looks to be a rocky ledge between the upper and lower sections. I am also hoping this makes the monastery look like it is in a more wild and rocky location. Once that was done, I took a section of craft foam, sometimes called "fun foam," and measured out the flat surface of the upper and lower level. A piece was cut for each and tacky glued down. This enables the buildings and other architectural elements to be "sunk in" beneath the surface. I will cut the shape of the building away from the foam surface and glue it to either the board or foam core beneath.
Hirts Arts rocks line the ledge between the upper and lower levels. Also thin "craft foam" was glued down as a surface for both levels
I wanted a church and a collection of "beehive" huts in my monastery. So, I figured I'd put the church on the upper level and the huts on the lower. Once again, I dug out my leftover Hirst Arts block to form the foundations and front and back walls of the church. The long side walls would be made to look like "dry stone" -- a common type of architecture in Celtic monasteries. I used some of the window pieces to create the doorway and tiny windows in the rear wall. More Hirst Arts blocks were used to create a well in front of the church, which was sunk into the foam base of the upper level so only the top lip of the well projected above the surface. I also peeled away the craft foam surface to tacky glue the resin Celtic cross to the foam surface of the upper level. I'm hoping that the glue, lip of the craft foam and the flocking that will be added later will keep it in place. I'll have to be careful to remind players not to pick the monastery up by the cross, though! At this stage, the monastery is starting to come together nicely.
Work in progress shot of my 28mm Celtic Monastery for my Dark Age skirmish games
 While all this was drying, I cut out a couple pieces of foam core for the long, dry stone walls for the church. I simply covered one side with glue and then poured on Woodland Scenics Coarse Ballast (gray blend) onto it. I'd picked it out as looking a lot like dry stone, and the multiple colors in it will keep me from having to dry brush it different shades. I will put on a black wash and it should look great. I also began to work on the roof for the church. Its base was a rectangle of black styrene plastic, with succeeding levels of craft foam built upon it. I capped it with a triangular piece of balsa wood. The entire thing will then be painted with white glue and covered in the gray blend ballast to look like a dry stone roof. The picture shows the bright orange craft foam I used when I ran out of black. 
Close up of the church interior -- note the printed off "frescoes" on the walls, the jewelry cross, and the tile floor
I decided to keep focusing on the upper tier of my Celtic monastery. The above shot shows it about halfway done. The stone block foundation and front and back wall are painted. I got smart and am did the interior (see picture below) before I glued in the side walls. The side walls are not complete. I have to add more blended gravel to the front and back edges of them, and then do a black wash over the stones to make it look more shaded. The roof is ready for its coating of blended gravel, but is not in the picture. I really like how the resin cross I bought at Cincycon turned out. I'll have to take a better shot of it to show the nice detail. The church door is done, as well. It is corrugated balsa wood with jewelry rings and pin heads for the door handles. You can see the interior a bit better in this shot. The frescoes of Celtic saints are simply images taken from the internet and printed off and glued onto the wall. I gave the interior of the foamcore walls texture by gluing sand to it, then painting it black and drybrushing it two shades of gray (not 50). The tile floor is styrene from a local craft store. The cross is a jewelry piece from the local craft store, too. You can also see better here how I have to add gravel to the facing edges of the foamcore long walls.
Plastic domes from vending machines that will be used for the beehive monk huts
With the upper tier mostly finished, it was time to begin working on the beehive huts that the monks would live in. First, a word about them. They were constructed of "dry stone" -- which means no mortar is used. The stone was apparently angled out and downwards to shed rain because, well, it rains a lot in Scotland and Ireland! What I've read about them describes them as quite dry and cozy. Anyway, they most often had strong, wooden doors. That actually surprised me. I was thinking monks, with their taste for self-denial and mortification of the flesh, would have just a cloth or fur covering for a door. Apparently not.
The domes after roughing up their surface, inside and out, with fine sandpaper
Anyway, I went through three separate ideas on what to use for them. My first thought was those plastic half spheres which assemble into a ball that you can buy in craft stores. I picked up a few only to discover they were too big once I started laying out the surface of my monastery. Then I went to the dollar store and picked up a pack of those little one-serving cups of apple sauce. Still too big. Finally, I settled on those dome and cap containers that you find in vending machines with little toys or prizes inside. The first step is to use fine sandpaper to rough up the surface so that the paint will adhere better. I roughed up the interior, too, because I planned on painting the interior black.

The cardboard ring that each dome is affixed to
Next, I set them down on a piece of cardboard and traced their outline. I then cut a hollow ring from the cardboard for the domes to be "based" on. I figured this would give them a more solid fit onto the clay rings I would set them on (more on these next). It would also cut down on wear and tear on the edges of the domes themselves.
The domes after painting them black and then affixing the doors and coarse gravel to their surface. The doors still needed painted, of course!
I should have glued on the doors next, but got in a rush and spray painted them black first. The paint would have helped keep the doors attached, but oh well. I wanted them black so that any gaps that showed through the dry stone would look like shadow. The doors themselves were made from corrugated balsa wood. About half of the door projects downward from the dome. This will fit in the notch of the doorway of the clay ring. I wanted the huts to be removable so that things could be placed inside -- they're going to be used for skirmish games, after all! Once the tacky glue was dry, I painted each dome with white glue. I then poured Woodland Scenics coarse gravel blended gray over them to look like the dry stone. I made sure to cover the join of the door and the dome thoroughly in glue so the doors appear to be set into the stone. After the glue dried, I sprayed the stone with a clearcoat. Finally, I brushed on a heavy black wash to darken the stones and blend it all together.
Air drying clay available at the local craft store
I mentioned the rings, above. I thought I would give each hut a foundation of solid, cut stone. Since I don't like firing sculpy in my oven, I purchased a bag of air drying clay instead. I roughed out each ring, trying to give it a more square and somewhat irregular look. I immediately made impressions with a dull Xacto knife to represent the outlines of the stone. I wasn't 100% thrilled with how they came out, but then again, I never claimed to be a potter or sculptor! They should be functional on the tabletop and look nice once the monastery is all painted and flocked.
A clay ring to represent a stone base for the huts
Once the clay was dry, I traced each ring's outline on the lower tier of the monastery. Remember how I had put a surface of craft foam over the top of the wooden plaque's flat surface? Well, this was part of my reason why. I cut each outline with a sharp Xacto knife and then peeled back the craft foam, exposing the wood beneath. Then I used tacky glue to attach the rings to the surface. This gives it more of a snug fit and will serve to blend the stones into the surface of the ground. At least that is the plan! Next up, I will paint the rings like stone and begin flocking the entire monastery grounds.
Carving out the outline of each clay ring onto the craft foam skin that was glued to the plaque. You can also see the finished roof and dry stone long walls of the church in this picture.

Monday, November 6, 2017

Crusader Battle of Ascalon using Hail Caesar

From left, Joel, Allen, Andy, and Brett listen as Steve explains the special rules for the Battle of Ascalon, 1099 A.D.
Steve V has decided that his Spring convention game will use Hail Caesar rules to refight the Battle of Ascalon, 1099 A.D. This Crusader victory is considered the final battle of the First Crusade, and takes place after their capture of Jerusalem. According to reports, the Crusaders caught the Fatimid Egyptian army unprepared, and this is what Steve has simulated with his special rules.
Keith's center of Christian pilgrims, dismounted knights, and crossbowmen advance aggressively towards the Muslim camp
One of the deciding features of a game of Hail Caesar are the morale tests that units must take -- generally when they lose a round of combat. Steve instituted a sliding scale with Fatimid units receiving a substantial negative modifier in early rounds, but getting progressively less words as the battle moves on. Our battle plan was to advance as quickly as possible -- even charging on the first turn of the game, if possible.
Across the battlefield from me, Tim's emir orders his Saracen cavalry forward to try to hold up my advance
We won the Initiative, and chose to go first. Another key feature of Hail Caesar is that players are in control of a commands composed of a number of units (mine had two mounted knight units, one heavy infantry spear and one heavy infantry crossbow). One of my knights could actually reach one of Tim's Bedouin cavalry units, if I rolled well. I immediately set out to even the playing field for the Fatimids by failing on my first command roll -- which ended my turn prematurely. No advance. On the opposite left flank, Mike W followed suit. Hmm, now them's some bad omens!
One of Tim's cavalry units charge into my Crusader spearmen, but their crossbowmen and knightly comrades close up to add support (in Hail Caesar, flank and rear support give bonus combat dice)
Steve's modifiers for the Fatimids also extended to bonuses to the Crusader's command rolls early in the game, and negative modifiers for the Muslims. My opponent Tim failed his rolls, as well, and no advances were made -- we must have all been praying, we decided. Elsewhere, our center Keith was pushing forward quickly, opposed by Allen (who was rolling very well) and Andy. My command eventually got moving and we began to take the battle to the Fatimids. There is a substantial random factor with Hail Caesar with the command die rolls and loads of dice for combat, as well. Surprisingly, my rolling wasn't ALL terrible. I had my usual challenges, but never actually lost a unit while putting a number of Tim's units to flight.
Andy demonstrates how the Fatimids should hammer the Christian lines, while Joel watches on and Allen quaffs some of the beverage forbidden by the Prophet
In fact, we ended up winning the game despite our slow start and despite Keith's center mostly disappearing. It was shored up by the charge of his last remaining knight unit. Not a lot of maneuver, but like most Hail Caesar games, a definite slugfest. If you like historical refights that involve pushing lead and rolling lots of dice, look for Steve's game at Cincycon and Daycon in 2018.
Though it looked like they'd prevail when Keith's center nearly collapsed, the Fatimid Egyptians were doomed to repeat their historical loss to Godfrey de Bouillon's crusaders