Blast Markers...Finally!

So, I've been wanting to do these for a LONG time. I've used flickering tea candles before to make a log cabin on fire, cannibal cook pot, and such. Most recently, I used one at the core of my downed helicopter piece of terrain. However, I'd been wanting explosion markers that I can use on the tabletop to either mark burning areas in a scenarios or whatever. What finally got me going in creating these was the idea of using them as Suppression markers in Xenos Rampant Sci-Fi miniatures rules. A suppression marker denotes a unit that failed a Courage test on the previous turn and must attempt to Rally. How to make sure you don't forget to do that? Tiny cardboard counter saying, "Suppressed"...? Heck no! 

    My flickering tea candles with the bases spray painted black (after masking the plastic "flame")

Those who know me have realized by now that any markers I create for a game must ADD to the look of the game -- not detract from it. For example, for Wiley Games you need a number of marker types. You need something to show that figure has acted already this turn (well, at least you should in case your friends might conveniently "forget"!). I use a flocked and textured round base from a pack I bought from Michigan Toy Soldier Company. It looks good on the tabletop and is unobtrusive. You will also might need "Shock" markers. I have tiny brown smoke markers (bullets kicking up dust around the figure?). For a figure that is stealthy, we use a tiny flocked piece of vegetation. Long ago, they earned the nickname "hunker bushes" to mark figures that had "hunkered down" to gain better defense.

    The "batting" material used to stuff pillows or teddy bears before spraying black

So, it should be no surprise that, once I'd decided to create these, I bought a pack of small, flickering tea lights from Hobby Lobby. I immediately went out and watched a bunch of YouTube videos on how to create explosion markers from them. In the end, this is what I decided to do, step by step.

1. Put masking tape or painters tape around the plastic "flame" part of the candle. Then spray paint them with matte black paint or primer.
2. Use wire cutters to cut off the flame at about the halfway point. You need a wide enough area to insert three fiber optic cables.
3. Cut three different lengths of 2mm fiber optic material. I had to buy it off Amazon because I couldn't find any store locally that sold it. Insert those into the open area of the plastic flame and press them down against the tiny little LED light at the bottom. Add Tacky Glue where the fiber optic material touches the edge of the plastic flame you cut off to affix it in place.
4. Once dry, take pliers to flatten out and deform the ends of the fiber optic material so it looks like slag or molten fragments being flung into the air.
   
5. Cut a section of "batting material" -- the stuffing you put in pillows or teddy bears. Cut it so it falls just short of the height of your shortest of the three pieces of fiber optic. Make it long enough to wrap around the base of the tea candle.
6. Place the batting material on a box or something and spray paint the material black, darker at the bottom (to cover up the tea candle once you affix it), but more irregularly nearer the top. There should be a mix of white, gray, and black in your plume of material.
7. Coat the outer cylinder of the tea candle with Tacky Glue, then wrap the batting around it. Don't press it in too hard or the glue will bleed through and make shiny clear spots. The material just needs to NOT unwind.
8. Ka-BOOM -- you're done! 

The tea candle with three lengths of 2mm fiber optic cable inserted into the plastic "flame"

My explosion markers are shorter in height than some you may see on some YouTube videos. That's because I want them to be markers to remember which units are suppressed and have to check morale. And with one of these things flickering in front of the unit, there's no way you'll forget!

    Outer edge of the tea candle painted with Tacky Glue and the batting material that will go around it

Here's a link to the "One Man and his Brushes" blog entry that inspired me, just to let you know that I didn't think of all this myself! What's next on my painting table. More zombies! These the the infected style zombies from the show, "The Last of Us." I currently have the flesh and base coat on the clothes competed. So, expect these early next week!

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 64
• Miniatures painted in 2024: 80

 

Post-apocalyptic Survivor Van & Characters

 

    Five 28mm survivors from Battle Valor Games leave their 3-D printed van to explore some ruins

I was perusing the Lead Adventure Forum before Origins, and saw a post about a zombie apocalypse rules set called Zombie RV, by Grey Area Games. Released this March by David Bezio, it is a fast-play, tongue-in-cheek survivors vs. zombies miniatures game. The introduction and rules are only six pages, with four extra pages of scenarios. I was intrigued by the simple mechanics, and also by the fact it seemed something that would scale up easily for my larger Sunday evening gaming group. What's more, it also seemed something that you could easily add in character advancement and turn into an ongoing campaign. 

    Many zombie games feature characters without firearms, so I figured that I needed to paint some up!

Yes, I realize that is exactly what I am planning on doing with County Road Z! However, there are a LOT more rules in that book, and it is the campaign rules in County Road Z that attract me than the combat system. The actual combat system for both sets is very simple. So, while I wait on the actual hardcover rulebook to be shipped to me, what's the harm in trying a couple games with these rules?

    I like how these figures came out - their clothes looks worn and scruffy...suitably post-apocalyptic

One thing that both rules sets feature is survivors armed with melee weapons -- not just firearms. Nearly all of my post-apoc figures are armed with some type of gun. So, I figured it was time to dig into the unpainted lead pile and paint up some with just melee weapons. I have a number of these type from Battle Valor Games (which picked up many lines from the defunct Sgt. Major Miniatures). I dug through the packs and picked out five likely ones. I needed to add a weapon to one (who appeared to be just throwing a rock), so drilled out his hand and gave him an axe. An axe is a very thematic anti-zombie weapon, right?/

    I like having my survivor figures wearing stuff like hoodies, leather jackets, tennis shoes, etc.

Two of the figures had leather jackets, so I painted one black and the other brown leather for variety. These fiver are not meant to be a gang, as such. Instead, I painted them relatively generically so that they could be part of any player's group of survivors. I did decide to get a bit fancy with their clothes and gave them logos on their clothes. The leather jackets had biker gang logos on the back, while the others had Under Armor, Adidas, etc. The one in the red hoodie I couldn't resist giving a Woody Hayes style Ohio State University hat. It harkens back to the my Bucknuts survivor gang, one of my favorites that I've painted.

    I used my tiny brush and micron pens to do biker gang logos on the backs of the leather jackets

I also immediately put to use one of my most recent purchases -- the pack of 3-D printed bottles I picked up at Origins from Elrik's Hobbies. Most of the tiny bottles appear to be groupings of 3 or more, but there are some individual ones, too. I was able to snip them off easily and add one to each base after the flocking was done. I painted a couple of the bottles "beer bottle green," two others brown, and a final one a gray/white that I was hoping to get a clear bottle effect from. Not sure it worked out so well (look at the OSU survivor and judge for yourself). I like how the green ones turned out best.

    A 3-D printed van from Diabolical Terrain was painted up alongside this batch of survivors

At the same time I finished these five survivors, I also completed a 3-D printed van that I'd purchased from Diabolical Terrain at DayCon 2024. I spray painted it black, then added a 50/50 mix of acrylic black paint and water to get it into all of the crevices. Next, I painted the body of the van metallic blue. Of the handful of metallic craft paints that I have purchased, the dark blue is one of my favorites. There are a lot of metallic blue vehicles on the road, so it looks like it fits. The van is modeled with some dents and bangs (from running over zombies?), which I like. I did some rust effect where the metal would have bent and the paint may have come off. The windows are molded solid, so I painted them black and added in white and light blue cracks to show more damage.

    

    The van looks a little beat up, but it will be the "ride" for a group of survivors in my zombie games

I went back and forth whether to base the model like I have done for my other post-apocalyptic vehicles or not. I decided that vehicles that would be the survivors' "rides" would be un-based, while those that are wrecks would be based. This will allow us to move it wherever needed on the tabletop, whether on streets, sidewalks, or through fields, and have it not look out of place. I painted the bumpers a dark gray and the chrome Pewter. At the top of each window, I added in a two-tone blue "sky reflection" off the glass window. Maybe I need to go back in and add tiny diagonal white lines on the black part of the glass so it is obvious what effect I was modeling? What do you think?

So, what's next on my tabletop? I am finally finishing up my suppression markers for Xenos Rampant, using flickering tea candles. I've also begun a batch of 10 "Infected-style" zombies to use for Zombie RV's "fast zombies" and "mean zombies." So, look for those soon, as well! And here's my 2024 to-date tally of painted figures vs. new ones acquired:

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 64
• Miniatures painted in 2024: 80

Purchases from Origins 2024

Exhibit Hall at Origins 2024 -- picture taken by another attendee's FB post (thanks Scott Brady!)

I didn't have high expectations for the Exhibit Hall at Origins. It is a multi-genre convention, and to be honest, the role players and board gamers probably outnumber the miniatures folk handily. So, I wasn't expecting a lot of miniatures or terrain that I would want to buy. I do play a decent number of board games, though. There was one I was looking to pick up, and who knows? I might find another one that looked interesting.

    I was looking for this but couldn't find it in the Exhibit Hall

To start with, I couldn't find the one game I was looking for (Aliens: Another Glorious Day in the Corps). It is four years old, but that's not exactly Ancient. So, I was surprised none of the board game companies in the Exhibit Hall carried. it. As for another board game that might catch my eye, most of the big board game companies were not in attendance at Origins. Instead, there were a lot of smaller or mid-size companies in the Exhibit Hall. I glanced at their games, but it was really sensory overload. Dozens and dozens of brightly-colored boards with brightly-colored pieces or counters. Lots of "cutesy" style games, with cartoonish boxes. Nothing really jumped out at me, and other slightly older board games I'd been considering picking up simply weren't on the shelves.

    I liked these 3-D printed "Gatorfolk" miniatures from Beldolor Studies & eventually bought some

I did find one 3-D printed miniature booth that always had a crowd around its table. It was Beldolor Studios. Their figures are anthropomorphic gators, frogs, fish, and other such things. They also had some bizarre, creepy monsters like their Xenocats. Prices were a bit steep at $8 for a 28mm figures, but they also had a bin of misprints. I went back to their booth several times, pondering what to buy. I eventually settled on five of their Gatorfolk -- three misprints that I will change the weapons out on and two Gatorfolk "Thagomizers." Yes, that is Thagomizer, as in a spiky tail from the Far Side cartoon! I will probably use them as aliens for Sci-Fi skirmishes.

 

    I picked up these two bags of 3-D printed bottles to use as debris on the bases of my post-apoc figs

I also stopped by Elrik's Hobbies a number of times, too, deciding what to buy. In the end, I picked up two small packs of 3-D printed bottles to use on bases for my post-apocalyptic and zombie games. I already am tossing 28mm scale bricks onto the bases, as well as rubble, broken pieces of wood, etc. I thought small bottles would be perfect scatter for the bases, too. In fact, I've already snipped off a number of the bottles and put them on the bases of some post-apocalyptic survivors. I also picked up a cavern bridge -- just because it was a very cool model and only $11! Think of the chase scene under the Misty Mountains in Peter Jackson's The Hobbit and you'll get an idea what it looks like. 

    I also picked up this Cavern Bridge Set, which at $11 I felt was a steal (it's more than a foot long)

And that's it! Despite being given a $100 Visa gift card recently by a friend, and despite having money from rules sales, I didn't buy anything else. I suppose I will not be so restrained on my purchases next month when Historicon 2024 rolls around. Still, if you look at my tally below, I am still in the green! I've painted more miniatures in 2024 than I've purchased. We will see if that trend keeps up...!

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 64
• Miniatures painted in 2024: 74

Downtown at Origins, the Streets were Mean!

    The Santanas face off against their rivals, the martial arts gang the Daos, at Origins Game Fair

Many years ago, miniatures were a major part of Origins Game Fair in Columbus, OH. Then came a period when the Game Manufacturers Association (GAMA) focused instead on the big box companies, and the individual GMs running cool miniatures events were shunted to the side. If you didn't want to buy space, they didn't have a use for you -- or at least that's how it felt to us. Time changes all things, though. We began to hear rumors that the new management at GAMA was much more friendly to the humble miniatures game master. That Origins wanted us back, and were seeking us out. 

    The Eastmoor Kings arrive in the turf of hostile gangs, hoping to fight their way through to home

As a member of the Great Lakes chapter of the Historical Miniatures Gaming Society (HMGS-GL), this was intriguing. Origins used to be one of our most fertile recruiting grounds. The people who attended this multi-genre convention were already gamers, and may of them miniatures gamers. We would run dozens and dozens of events, and people from all over the country would see and play in our games, and sign up to be members. The Great Lakes board discussed going back, and agreed it could be worth the effort. Last year, we "dipped our toe" in the water and a handful of us ran games. We learned the system, how things had changed since we were there before, and felt it was worth the effort to try again.

    I filled up 32 of the 36 slots in my six games over the course of Thursday, Friday, and Saturday!

This year, we signed up as a "club" to have our own space at Origins. We would recruit game masters, schedule our events, and act as a liaison between the convention organizers and our members running games. That's how GAMA likes to do it, these days, and it worked well. It worked for us because GL member Jenny Torbett stepped forward and volunteered to be the organizer and made our effort possible!We had 47 events scheduled prior for the convention. I decided to go "all in" and run Mean Streets in the morning and evening on Thursday, Friday, and Saturday. After last year, I felt it was my best fit for the Origins crowd of the rules sets I have written. The vibe at the convention is more fantasy and Sci-Fi and less historical than most of the shows I attend. Of course, we were taking our first steps to change that, and quite a few historical miniatures events were run both in our area and in other club areas.

    Quiet before the storm -- downtown Columbus set up & tense, waiting for gang warfare to break out

I decided to go with my most recent scenario which casts my Eastmoor Kings gang into the role of the Warriors from the movie of that name (and my inspiration for the rules). I was gratified that nearly every person who came up to my table and spent some moments eyeing it was familiar with the 1979 cult movie classic, The Warriors. I had definitely picked right when trying to fit a game and scenario to what would be popular with the attendees. The scenario has six player slots and I filled 32 of the 36 positions over the course of my six games. I was ecstatic with the player turnout. I honestly couldn't have expected much better than that.

    Five members of the Eastmoor Kings seeking a way through the Mean Streets of Columbus

In the scenario, the Eastmoor Kings have been lured to a gang parley. When no one else shows up, they know they've been duped. Now, they have to try to make it back home to the East side of Columbus through the turf of hostile gangs. Two players take on the role of the Kings, each with a Gang Boss, Warchief, and three Punks under my Mean Streets rules. The other four players each control a different gang of the same composition, with its own secret objectives and hatreds of other gangs. None of them want the Kings passing through their turf, but they dislike their neighbors just as much.

    Before they get home, the Kings have to pass through the turf of the Daos - black, martial arts gang

I ran this scenario earlier this year at both Cincycon and Drums at the Rapids. It went over very well at both shows, and I was hoping it'd be a hit here, too. As it turned out, the players were some of the most enthusiastic I've had yet with my game. I saw so many different possible scenario outcomes over the course of the six games. In the two games where I had only four players, I actually removed the invading Kings from the game and instead hosted a free-for-all among the other four "local" gangs. I think the enthusiasm of my players made me enjoy it as much as them. Even on my last game, Saturday night, it was a riot watching the Santanas carjack vehicles and use them to try to run over opposing players. It may not have been a wildly successful tactic, but it was hilarious for both those at the wheel and those they were attempting to run down.

    'Halt, police!' The police show up in the middle of the board near the end of Saturday night's game

There were games when none of the Kings made it to the bridge and its bus stop on the opposite board edge (their destination was to catch the bus home to their turf). And there was also a game where eight of the 10 Kings made it to the bridge -- the most ever in all my times running this game. There were games when the police arrived early and others when they didn't show up at all. I had police officers (controlled by the player whose gang has nearly been eliminated) shoot opposing gang members and other times when the cops were knocked out by the gang members. Years ago, I had come up with the game mechanic that, when a player is down to one or two gang members left, I give them control of a police car which can arrive on any street board edge. It gives them a chance to get some revenge or even affect the outcome of the game. What's more, it takes a player who may be disappointed with what is going on and turns them into someone eagerly looking forward to mess with his opponents! Win-win for the player and me as GM!!

   'Student Body Right' - all 10 of the Kings quickly move towards the right side of the board to escape

One of the most cinematic moments was on Friday night when the two Kings players decided to run a "Student Body Right" maneuver. Both gangs crossed to one side of the board, attempting to overwhelm and blow by the Franklinton Flippos. After initially holing up in an alley in their turf, the Flippos player grew bold and formed a line at the playground behind their two apartment buildings and the board edge. It was the narrowest point and the 10 Eastmoor Kings could get at the five of them only three wide. Marvin, the Flippos Gang Boss (and would-be Leonidas at Thermopylae), stood up the Kings and began knocking them down. In line beside him were his Warchief and his punk who had the "Scrapper" ability. Great and brave tactics!

    The Franklinton Flippos take a page from the Spartans and hold off the Kings at the narrowest point

Soon, the rival Indianola Mohawks from across the street were inspired and launched themselves into the back of the Kings, diverting their attention and weakening their push. Although the Kings outfought the Mohawks and began knocking one punk rocker after another out, this ended up having an effect they didn't expect. When Kings punk Cy -- the only player in the game armed with a pistol -- fired off some shots early, the police arrived soon after. Since the Mohawks had lost the most gang members at that point, they were given control of the cops. The police car contains two officers, one with a billy club the other a pistol. Both are "Warchiefs", which makes them difficult opponents. Now, the Kings had to face not only the determined and resolute clown-faced Flippos and the punk rock Mohawks, they had the police on their backs, too (cue The Clash song...).

    Racing to the aid of their bitter rivals, the punk rocker Indianola Mohawks crash into the Kings rear

Fortunately for the father and adult son playing the Kings, the other two local gangs, the Santanas and Daos, did some serious dawdling on their way to join the fight. Ostensibly, all four gangs claimed they'd show solidarity and fight off the outsiders. In practice, the effect of these two gangs was to cut off any straggling Kings who tried to escape from ever reaching the bridge. It was fun seeing those two gangs role play their gangs, though. I think we all knew they were simply waiting for the other four players to wear themselves out and then they'd come in and sweep the streets! They talked tough, but were short on action. It was hilarious to watch them justifying their foot dragging.

    Even the police got in on the act in trying to squash the Kings and their attempt to reach home!

The Kings lost that scenario, but the next morning the opposite happened. The Flippos, who had stood like a stone wall in the face of invasion the previous night, absconded immediately. They dashed into Santana territory and concentrated on their secret mission -- stealing snacks for tonight's party. While they stuffed twinkies into their clown pockets, the poor Hilltop Highlanders (who I had swapped out for the Mohawks that game) were beaten down almost to a man. They stood no chance against the combined force of the Kings. It was still a very interesting game, but in the end, the Eastmoor Kings won with 19.5. It was very close, though. The twinkie-eating clowns came in third with 15, edged out of second by the Santanas at 16, who showed no shyness to rumble.

    A 3-gang rumble in the middle of the streets between the Daos, Kings, and Mohawks

The final game on Saturday night was the closest of them all. A father and middle school aged daughter played the Kings. They got a respectable four Kings on the bridge by the end of the game. However, the car-jacking, vehicular homicide attempting Santanas edged them out by a HALF POINT. That was, without a doubt, the closest of the finishes I've had in this scenario. There was every chance I could have been tired and burnt out by my sixth time running the game, but the players were simply too fun to let that happen. We laughed throughout the game and everyone had a good sense of humor. 

    The Daos try to fight off an invasion by the Hilltop Highlanders, who seem intent on stealing beer

All in all, Mean Streets at Origins was a success. I ended up selling all six copies of the rules that I had brought, which is the most I have ever sold at any convention (not counting wholesale to exhibitors). There was a constant stream of people stopping by my table and praising how it looked, which is always gratifying. Running a game can be stressful, tiring, and hard work, at times. However, there is a dynamic that when players are obviously having blast, it seems to GIVES you energy. I fed off of my excellent players' energy for three days.

    I subbed in & moved the starting spot for the Hilltop Highlanders around to change up the scenario

Not only was my own personal experience a success at Origins, our chapter's venture there was a huge positive, as well. Dozens and dozens of folks came by and found out about our chapter. We gave away lots of flyers for our flagship convention, Advance the Colors, Oct. 11-12, Springfield, OH. We gave out a stack of handouts with information about our chapter and what historical miniature is to people who stopped by. The editor of our bimonthly magazine, The Herald, gave us a couple dozen previous issues as promotional materials. We handed all of them out. And guess what? New memberships to HMGS Great Lakes are already starting to roll in!

    The Flippos watch other gangs invading their turf from their apartment, contemplating their move

So, just like many years ago, I think our chapter can sit back and call our venture at Origins a success. I know my own games were a success, and I am already thinking of how I can one-up my scenario next year! If you are a historical miniatures gamer -- or any minis gamer at all -- I encourage you to make plans to attend next year's Origins Game Fair. It was a great time, and lots of people had lots of fun this year. I'm glad that we decided to go!

    Despite the threat from the Kings, rivals the Daos and Santanas rumbled in more than one game!

    The choices made by the Franklinton Flippos, on the edge where the Kings invaded, were crucial

    All across the 5'x3' battlefield, rumbles broke out and gangs traded punches, knife thrusts & more

    As a reward for her organizational work for our Great Lakes effort, Jenny played in my game twice!

    Julio, Gang Boss of the Santanas, hops atop a car and taunts the other gangs in an early game

    Saturday morning's game saw Liam and Brian, at the table end, score the most success for the Kings

    Gang members from the Flippos, Santanas, & Daos square off - oblivious to the police sirens!

    My players were wonderful and had a great attitude in all six of my games

    'Stop! All of you! I mean it...!' Columbus Police try unsuccessfully to corral a gang fight

    Twice I had just four players, in which case I would simply do a 4-on-4 gang free-for-all

    The spacious, airy gaming hall at Origins is the perfect place to host a miniatures event!

Two Warlord Prizes for Origins 2024 Saga Tournaments

    One of the two warlords I painted up as prizes for the Saga tournaments at Origins Game Fair 2024

When some of the Saga Ohio guys decided to run events at Origins, I promised to paint up some warlord stands to give away as prizes. That's becoming a signature prize in my tournaments, and from what I hear from players, the warlord stands are appreciated. Since one of the tournaments is Dark Ages and the other is Medieval, I figured it made sense to paint up one of the appropriate theme for each.

    A side view of the Gripping Beast mounted "Brian Boru" that I used for the general figure

I dug through my unpainted lead, looking for suitable miniatures. Awhile back, I'd purchased a mounted Brian Boru (famous Irish who fought back against the Vikings), and knew it'd be perfect. Typically, I have a mounted general on my warlord stands, but a foot standard bearer. That way, whoever wins the prize can deploy it as either mounted or foot -- at least that's how I look at it! The third figure on the circular base is sometimes a musician, bu this time I decided to go with a dog (or dogs, plural). For the standard bearer, I found a foot figure holding his arm out that would be work well to attach a banner against. The figure also had a tunic and cloak, like the Brian Boru figure.

    A close up of the 28mm wolf figure that I used for the general's pet

For the dog, I decided to use a 28mm wolf and paint it up as a wolf/dog hybrid. I used Google Image searches till I found one whose color I liked. It somewhat matched the general's horse color and the standard bearer's tunic, so I went with it. I used a green and blue color scheme for the mounted general, going with lighter sleeves and paints and a darker cloak. The tunic is a medium blue, and I repeated those colors in the decorations on the hems and headband. I really like how his light reddish hair and beard came out, too.

    The Medieval general used a Teutonic Knight figure, a mailed foot soldier, and two 28mm dog figs

For the crusader figures, I believe I chose a Teutonic Knight general figure as the mounted warlord. It is a big, beefy figure with a mailed horse, large cloak, and big triangular shield. There are lots of pieces of equipment fastened to the figure, so this one was more time consuming than you might think. Of course, the decorations along the hem, chest, and horse added to the work, too! I was happy with how the tiny white dots turned out inside the red cross blazoned across the general's chest. I think his auburn hair and beard look nice, as well.

    The banners for my warlord stands are all designed in Photoshop using clipart and then printed out

The standard bearer is a typical mailed infantryman that I felt I could pose his hand to be holding a banner. I gave him some extra decoration along the hem and a fancy white cross on a red shield to go with the general's white wolf design. He was probably the easiest figure (beside the dogs) to do on the two warlord stands. Most of his body is covered in mail, which I do with a base coast of Iron Wind Metals Steel and dry brush of silver.

    This warlord is accompanied into battle by his loyal Norwegian Elkhounds

I decided to give this general a pair of dogs using some of the many 28mm dog figures that I have collected over the years. With their size and look, I felt they'd fit well as Norwegian Elkhounds. I did my usual Google Image search to get the coloring as close as possible. I really like how they turned out.

    These two warlord stands will be given away as prizes at the Origins Game Fair tournaments

Finally, the banners are all designed using clipart found on the internet and Adobe Photoshop. I like how it lets you select a color and change it to whatever. you choose. Speaking of color, I probably should have made the Dark Age warlord's green banner a little lighter. Well, it LOOKED lighter in Photoshop, but once printed out on an Office Max laser printer, it seemed darker. I'll try to remember that in the future to go lighter if there is a question. All in all, I'm happy with both warlord stands and hope the players who win them will be, too. If you're a Saga player in the area, you really should come to Origins Game Fair, June 19-23, 2024. Dan Neal, Lee Parker, Joe Dihrkop, and Rusty Parker have collected a LOT of prizes and set up some really fun events. There is a "Learn to Play"/open play on Thursday, a Medieval tourney on Friday, and a Dark Age one on Saturday. 

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 64
• Miniatures painted in 2024: 74