Giant 28mm Water Tower from Bad Goblin Games

    28mm water tower, 3-D printed from Bad Goblin Games -- a bargain at only $20!

Some of my favorite purchases this past summer at Historicon 2024 were from the Bad Goblin Games booth. This water tower was one of them. It has been looming over my painting desk since I brought it home in July, impatiently waiting for me to get it painted and ready for the tabletop. It'll be perfect for modern and post-apocalyptic games, and a nice piece of eye candy on the tabletop. Probably the most amazing thing about it to me was that it cost only $20! They also make a ruined one, by the way...

    Big Bass or my survivor group the Bass Reeves checks out the view from halfway up the tower

It is 3-D printed, so I gave it my usual treatment that I do for terrain. I spray painted it black first with Krylon acrylic paint and then went over it with a 50/50 mix of water and acrylic black paint when dry. I went back and forth about what color to paint it. My current water tower, a 15mm MDF one bought years ago from Impudent Mortals, is painted in a steel color. I like how it looks and have used it numerous times in my 28mm games, too. I mean, how tall is a water tower supposed to be to be "in scale?" So, I decided to copy that minus the rust effects I gave the MDF one. I struggled over the "to rust or not to rust" decision for awhile, too, but in the end thought it might look best with no rust on it.

My base coat was one of my favorite metallic craft paints, a Folk Art bottle called "Gunmetal Gray." I left the grooves between the square steel plating black, but painted the rest of it entirely in that color. Next, I used another Folk Art craft metallic called Pewter and did highlights were I thought the sun would be shining off of the tower. Parts that were underneath or would likely be in shadow I left that base coat. Finally, inside the irregularly shaped patches of Pewter, I added a splash of Bright Silver.

    I went back and forth how to paint the water tower but ended up going with boring steel...ha, ha!

This is typically the recipe I use for large, steel-colored metallic areas on miniatures or terrain. I really like how it looks once I put a black wash over it. The effect is to soften the lines between the different colors and blend it all together. Except this time it didn't. To me, the Pewter and Silver patches stand out too brightly still. At first I thought maybe I was being too critical of my work. Once it is all flocked and on the tabletop, it will look great, I told myself. Except I am still unhappy with it. No, I'm not going to repaint it or sell it or throw it away, or anything like that. It's just that normally I am fairly excited about how my terrain looks. The water tower is an exception.

    Out of breath from the climb, Big Bass admires the view from high above the tabletop

I would love to hear from readers of the blog what they think. Am I being too critical of myself? Who knows? Maybe next convention I see Bad Goblin Games at I will buy another one (it's only $20!) and try again next year...ha, ha! The flocking was done similar to how I do my standard bases with an irregular dirt and grass look. After finishing it, I also debated whether to "junk it up" with trash, discarded machinery bits, or whatever. In the end, I decided not to do that. Still, there certainly was a lot of indecision and self-doubt going on with this terrain piece!

Either way, though, the water tower itself is an amazing piece of 3-D printed terrain. The only modification I did to mine was to cut a hole in the upper platform so that the ladder comes up from the basket and through the hole. I had to cut to size the two 3-D printed ladders that came with the model. I took the trimmed off pieces and placed them along the railing inside the metal cage halfway up. I actually snipped a piece awhile back to use for my "Zombie RV" that I converted from a die cast pizza truck. Next time I am going to see them, I may ask them if I can buy more of those ladders. They could be useful for a number of things. Sure, I can scratch build them, too, but these are certainly more convenient!

    This very tall terrain piece will definitely catch the eye of passers by at a convention or game day

I highly recommend Bad Goblin Games 3-D printed scenery and buildings. I have more of it to be painted on my "short list," so you will likely see more from them here in the future. If you get a chance, please let me know what you think of the water tower and any changes you would suggest.

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 226
  
• Miniatures painted in 2024: 235