'Silent Slumbers' Motel - Resin Building from Miniature Building Authority

    The Santanas take over my Two Story Shanty Hotel from Miniature Building Authority

This is one of the heftiest buildings I have ever built and painted up. From Miniature Building Authority's amazing line of resin buildings, the Two Story Shanty Hotel comes with upper and lower levels, roof, stone staircase, and balcony railings. It's a fairly heavy hunk of resin, but incredibly detailed down to cans and other trash in the hallways outside the motel room doors. I took my time on it and worked on it here and there over a few months until finally finishing it today.

    This hotel is a hefty hunk of resin, but very solidly built and has LOTS of details

I bought it last year at Advance the Colors (2022) and was honestly hoping to have it done before this ATC. Alas, it was not to be. That incredibly busy period from late Spring through October was consumed with getting things ready for that convention. I wanted to paint the hotel up as generically as possible so that it could be used for different periods. The air conditioning units affixed to the back of each room definitely dates it to the 20th century forwards. However, the weathered and aged stone construction means it could be used in a number of settings. Heck, with Star Wars liking for desert planets, this wouldn't really be out of place in a Sci-Fi game, either!

    Once you glue the balcony railings on, it is a three piece building - upper & lower story and roof

The first step in getting this ready for the tabletop was to glue the two balcony railing pieces to the upper and lower levels. I also glued the stone staircase to the side of the lower level, placing it so it would help hold the upper level in place. To help with that, I cut a piece of curved wooden molding and epoxied it to the front of the building. I attached it to the lower level, but half of its height extends to the upper level so that it will also help keep the upper level stable and in place. I considered magnets, too, but felt that the weight of the piece, along with the staircase and sign holding it in place on two of its sides made this unnecessary. 

    The stone staircase glues to the side of the lower level and its top step helps hold the upper in place

Once all the epoxying was done, I spray painted the three levels (lower, upper, roof) with Krylon Matte black, and followed that up with a 50/50 mixture of black acrylic paint and water. This helps the paint sink into all grooves and crevices, as well as giving a thick surface for the paint to adhere to and prevent the wear and tear of scratches or gouges. I decided to begin the painting with the interiors of the motel rooms themselves and work my way outwards. I chose four somewhat pastel colors to wetbrush the four rooms on each level in. I then painted the tiled floors in a contrasting color. Next, I picked out the interior door and window trim in a darker version of the pastel color. So, each room had its own color scheme.

    I began painting the interior rooms first and then worked my way outside

Next up were the blinds and doors, which I did with a base coat and dry brush. Finally, when all was dry, I moved on to the exterior surface of the building. I did its base coat in Howard Hues Camo Brown. This was applied in a thick wet brush, covering most of the surface, with only an occasional crack left in black. This was also applied to the tops of the walls separating each interior room. Once dry, I dry brushed the exterior in Howard Hues Colonial Khaki. I really like the way it came out, giving a warm, earthy feel.

    The front of the motel - this is a quality model and can likely be used in many periods & settings

It was on to the numerous details next, which included the air conditioning units on the back wall of every room, power wires running to each unit, the exterior window trim and doors, metal door handles, metallic plates anchoring the power wires, and even the trash in the hallways. The floor of the hallway was done in to look like concrete with a dark gray base coat and light gray dry brush. Once all the very significant details were completed, I applied a brown wash using watered down Vallejo vehicle wash. I am always happier with how anything dry brushed look when I finish off the exterior with a darker wash. I feel it "softens" the edges of the brush strokes and makes it look smoother overall.

    A three quarters view of the hotel back and good look at all the detail molded into this model

The last thing I did was the roof. It had been done in black base coat like the other sections. I did a red brown wet brush next, followed by a dry brush of the more orange tone Howard Hues Middle Eastern flesh. Once dry, I applied a dark brown wash over this, as well. The motel was almost open for business! I designed a sign on my computer to go over the long piece of molding I had glued to the bottom level. I went back and forth on naming the hotel. I was tempted to name it "Suite Dreams" -- liking the irony if it was used as a hotel of ill repute in a bad section of town. However, I know how wargamers are and someone would invariably point out the rooms are far too small to be suites! Wanting to forestall that banter, I decided instead to go with "Silent Slumbers Motel." This also has a slightly ominous tone for a location in the bad section of town!

    The detail goes all the way down to the trash strewn in the corridors

Miniature Building Authority terrain is always high quality and looks amazing on the tabletop. I encourage folks to shop with Kirk -- he's a great supporter of our hobby and a nice guy all around! Look for a few more of my MBA purchases to follow the motel onto this blog. I have more cool buildings I purchased from MBA, and hope to begin working on them soon!

    "Get a room!" the rest of the Santanas may have shouted to Margarita and Julio...

Some Cool-looking Robots and Droids for Sci-Fi Games

Selection of Droids & Robots from three different manufacturers recently finished up for Sci-Fi games

These have been sitting on my desk base-coated for several months, now -- perhaps longer! I began working on them when I was painting droids or robots for enemies in Space Station Zero. With my interest beginning to tail off and my painting schedule for last year's Saga tournaments picking up, they simply sat their dormant and patiently waiting for their turn. Now, that I have a renewed interest in Sci-Fi miniatures with my purchase of Osprey Games' Xenos Rampant (which I picked up from Shieldwall Gaming Club). I based them all on circular bases and pulled them into the painting queue.

    The three miniatures assembled - called Vatacina Sentinels and Purifiers on the Aberrant webpage

The three on the left in the metallic green, red, and blue are from Aberreant Games for their Rezolution Science Fiction Miniatures Combat Game. I don't know a lot about the rules, other than the website says they represent a dystopian 2175 A.D. future. I picked the miniatures up from Bryan Borgman at his flea market at the Origins Game Day this past January. Look at the website for Aberrant, I got an amazing deal. I swear he was selling these packs for $1 each. On their website now, they list for nearly $20 per figure! That said, I ended up failing miserably at putting them together and handed them off to my friend Keith. He's more adept at super glue, model cement, and other types of bonding agents. He did a fine job on putting them together, and I had to admit they looked a lot cooler than they had unassembled in the packed! I wish I had bought more, now...!

Love the look of these -- kind of like a cross between Star Wars droids and Starship Trooper arachnids

The miniatures resemble a cool-looking cross between the Starship Troopers arachnids and Star Wars battle droids. I painted them a base white way back when I started getting them ready. Recently, when I began working on them again, I changed my mind. I based those that were unbased on round magnetic bases and spray-painted them Krylon black instead. Following that up with my usual 50/50 acrylic black paint and water, I waited from to dry, then painted the entire surface with a dark metallic color. I then gave them a very dark black wash to see if I wanted to keep them a dark metallic. I decided instead that they would look better in brighter metallics. I chose my three current favorite metallics, a red, green, and blue. I left some portions the dark metallic and others I did in an accent color. I picked out various other details, such as tubing and silver blades. All in all, I was ecstatic about how they looked. Once again, at a buck apiece, I wish I'd bought more!

    Tracked robots (or droids) from Wiley Games, Reverisco, and Aberrant Games

The next batch is from three different sources. The futuristic artillery piece is from Reviresco Miniatures, the large, tracked robot is from Wiley Games, and the tiny droids are also from Aberrant's Rezolution line. The Wiley Games bot is called B3EAST and is a resin figure for only $5. He needs to be glued together, but that seemed to be fairly easy to accomplish. I decided to try some white metallic paint with red accents for this one to give it a more retro look than the crab-like Vatacinas. It took a couple coats, but it finally covered my original all dark metallic paint, and I like the way it turned out. The Wiley Games minis are very affordable, and I recommend them to anyone who wants to pick up some interesting or odd figures.

    The Droid/Robot artillery pounds away at their human enemies from the cover of a ruined building

The Reverisco Robot Power Gun was rather more interesting to put together. No matter which way I placed the pieces, I had some left over. Maybe it was meant that way to give you some variety? Reverisco is very old school metal minis. They tend to be on the clunky side and not as cleanly sculpted as more modern day miniatures. However, once painted up, it definitely looks cool and will be a good addition to a Sci-Fi force. Xenos Rising has support artillery as a troop type, so this will be perfect. RRB Minis & More has other Reviresco Sci-Fi gun types, so check out their site and pick up some! I just did a search on their site for "Reviresco" to see what they had.

    Another look at the whole batch of cool-looking robots and droids, ready for the tabletop!

 The tiny droids were in one of the packs I picked up from Bryan at his flea market table. I like the way they look and -- shocker -- wish I had picked up some more! All in all, I'm very happy with how this batch of mechanoids turned out. I look forward to using them in games of Xenos Rampant, and who knows? Maybe I'll start playing Space Station Zero again and they'll show up as the enemy in there...

"I'll be back...!" - Some Skeletal Steel Terminators

    My first specifically-painted miniatures for my Sci-Fi project, a couple of T-101 Terminators

I'd been going back and forth on what rules set I want to use for some Sci-Fi gaming. Originally, I had picked up Space Station Zero to play that with the guys on Sunday night. However, after playing one game of it here at the house with Jenny, I am not 100% sold on it being a good game for as many players we're going to have regularly. I bought the rules because the concept sounded interesting -- your crew is marooned on a massive, derelict space station that you are exploring. I liked Reign in Hell, another rules set by Snarling Badger Studios. I was hoping the rules would essentially be Reign in Hell with missile fire weapons (since Reign in Hell is all melee -- no missile fire at all). However, it uses a completely different system for both activation and combat resolution.

    The three different rules sets I was considering for my loosely-planned Sci-Fi project

Another candidate was the Wiley Games Sci-Fi rules Galactic Heroes. Inspired by Star Wars themed threads on The Lead Adventure Forum, I was planning on running Star Wars games using those rules. We already use the Core Rules from that stable for my post-Apocalyptic campaign, so the players would be familiar with the mechanics. That's good and bad, though. Would games simply feel like the same thing with different miniatures? Many years ago, we got into that rut when we were using H.O.T.T. (Hordes of the Things) for a number of different miniatures games. On the plus side, Keith had donated to me a bunch of the prepainted figures from the Wizkids Star Wars line. So, I'd already have figures if I went with that.

    The 3-D printed "Exterminators" packs contain a variety of poses and weapon types

At Advance the Colors 2023, I purchased a couple sets from the "Rampant" rules series from Daniel Mersey and released by Osprey Games. Their Sci-Fi variant Xenos Rampant caught my eye. Upon returning from the convention, I'd first read through the 2nd Edition of Lion Rampant (Medieval/Dark Age warfare). I was definitely intrigued by the system. The mechanics seemed fun and easy to pick up. I have also read numerous posts online from folks who love the Rampant system, so I thought it might be worthwhile playing one of their games regularly on Sunday evenings. Since we already play Saga for Dark Ages, I figured it'd make more sense to go with a different genre or period of gaming for the Rampant series. That way, it will both feel and looks different.

    1st batch of 12 Exterminator figures from JS Wargamer Printing (run by Cincy gamer John Leahy)

So, after examining each of the three finalists, I chose Xenos Rampant. My friend Keith has many figures already painted up that are usable for the system. Xenos is more of a "miniatures agnostic" rules set. It is meant to be adaptable to whatever figures you own or want to play with. I chose for my first batch of figures to painted up for the system 3-D printed ones that I purchased at CincyCon 2023 from John Leahy. He and his wife started a company called JS Wargamer Printing and sell a huge line of miniatures. These include lines inspired by Star Wars, Planet of the Apes, Warhammer 40K, and (crucially) Terminator. I bought two packs of his "Machine Wars - Exterminators." For all of his lines, John changes the name of the figures so they are not technically marketed as copyrighted lines, but they are all immediately recognizable. I believe they are designed and the STL files sold by Papsikels Miniatures. I can't confirm that as John was very busy at CincyCon and I couldn't talk much shop with him!

    I found 3-D printed figs fragile - one snapped minor handling and is now scrap for casualty markers

Like all 3-D printed miniatures, they ARE fragile. Very fragile, if you ask this metal miniatures enthusiast! John warns of this on his website, though. In this batch of 13 Exterminators, one of them did break at the ankles and ended up being useless except for scrap for casualty markers and such. Although John Connor may be hoping the Terminators end up being that fragile on the tabletop, I certainly do not! I'd hate to be repainting and replacing figures on a semi-regular basis and hope this was not a failed experiment...! 

    The other half of the dozen figures I painted up in this batch

The Exterminators did paint up VERY easily, though. I spray-painted them Krylon Matte Black, then went over it with my usual 50/50 solution of black acrylic paint and water. Next, I painted them a "Metallic Gray" (dark metal) base coat. Once it had dried, I dry brushed them silver. I touched up various other colors on the weapons, eyes, and other other metallic components. I did a dark wash on the weapons so the skeletal looking figures stayed shiny, but the weapons were a darker metallic. 

    Another look at the first batch of Exterminators - I'm very happy with how they look!

For basing, I used the wealth of leftover plastic circular bases that come with the Gripping Beast Saga army packs. I normally use square wooden ones for Saga, so have lots of these left over. I applied magnetic sticky base bottoms from Litko Aerosystems to the plastic bases and am fairly happy with how they worked. I used 5-minute, two-part epoxy to glue the Exterminator feet to the plastic bases, and they seemed to hold well. I jazzed up the bases with small rocks and bricks, then applied Woodland Scenics Blended Gray Ballast to the bases. I did a dark wash over the ballast, then actually dry brushed it lighter gray to bring some depth back up. Some more Woodland Scenics turf, burnt grass looking tuft, and spray clear coats and they were ready for the tabletop.

So, what's next? I have been acquiring some large, well-armed, robot looking figures over the last year or so, and they have finally made it to the front of the queue. They'll hopefully make for good support for the Exterminators and round out my first faction for a game of Xenos Rampant. Stay tuned for more!

More Post-Apocalyptic (Wrecked Cars & Dead Trees)

    Mantic Games resin wrecked vehicles painted up rusted and dilapidated for post-apoc games

With Advance the Colors 2023 behind me, I now seem to have more time for finishing up things I'd begun (or wanted to start on) earlier. First and foremost were four wrecked vehicles that I want to use for scatter scenery in my post-apocalyptic games. I picked them up at the Guardtower East during one of our monthly Saga game days. 

 Biggest complaint was that the window for the back up the pickup had to be glued in and didn't fit

These were made of a gray resin or plastic and came with two pickup trucks and two cars. Each type was identical, and the pickup required one piece of assembly. The back window of the pickup needed glued into place with the truck's bed. Only it wasn't that simple. Try as I might, I simply couldn't get it to fit smoothly. There had obviously been some warping or distortion that went on in the casting process. I ended up having to epoxy the windows into place as close I could. I then filled the gaps with green stuff. I was fairly happy with how I did with the green stuff. It is definitely something I am still a learner on.

    The models come dented to simulate a wreck, but all the rust and wear and tear was painted on

I spray painted each vehicle with Krylon matte black, following it up with my usual 50/50 acrylic black paint and water. I then epoxied it to a styrene plastic base, though I was tempted to leave it un-based and free standing. It might even look better on the tabletop that way, but I detest holding onto things while painting something, with the chance of rubbing off paint. Or paint the bottom and then painting the top. Basing something up and holding onto that base is always preferable.

    The windows are solid, so I used my brushwork to make them look broken and busted, too

Next, I did the base color for all four vehicles, leaving black gaps in the seams of the body panels, doors, etc. I'm not sure why I went with brighter colors for the vehicles over the trucks, but I did. I followed this with a dry brush of white or lighter color of the base. Next, I did a three part rust effect, beginning with a dark brown, adding in patches of a rusty, leathery brown, and then finishing it off with an orange clay color. Since the windows were solid, I had to paint cracks to make them look busted up, too. I painted the chrome areas a steel color, then pewter and silver highlights. Of course, each vehicle got a dark black wash to look appropriately abandoned and dirty.

    3-D printed trees from Rusty Parker of Jarls Workshop. I decided to make them "dead" for post-apoc

The next thing I finished off were two 3-d printed trees that I'd picked up as prizes from the Hold the Line Saga tournament in Port Clinton, OH. Rusty Parker of Jarl's Workshop printed them off and had numerous ones he'd painted up for terrain for the tournament. He had flocked them to look like trees in bloom, but I thought their bare branches would make them excellent dead trees to add to the smaller ones I'd painted up earlier. In a post-apocalyptic landscape, the dead trees at a nice desolate vibe.

    Closeup of the one of the dead trees with my 28mm Planet of the Apes gorillas patrolling nearby

These were very easy to get ready for the tabletop! I simply spray painted them black, did my usual 50/50 acrylic follow up, and then dry brushed them. I applied the first dry brush thickly -- more of a "wet brush." I used the Camo Brown from Howard Hues. Next, I did a dry brush of Howard Hues Khaki. A black wash finished them out, and they were ready for flocking. There is an area between the branches that looks like vegetation, so I flocked that with Woodland Scenics "Burnt Grass" flocking. Otherwise, I did a fine brown ballast around the roots and applied a Turf Earth over top of that. A couple more patches of burnt grass and some tufts, and they were done. Of course, they are taller than the box which I stored my smaller dead trees would hold! I will sit them on their sides until I think of a better idea.

    The smaller dead trees in back are from Mantic Games' Terrain Crate line, 'Gothic Grounds'

These two mini-projects took less time each than a normal batch of Saga miniatures, so it was nice to feel they were painted up quickly! Hopefully, the speedy progress will continue!

Three Warlords that "Got Away"

    The first of the three warlord stands using Gripping Beast's Godfrey of Bouillon miniature

This year, I continued the tradition of painting up and giving away warlord stands for my Saga tournaments at Advance the Colors 2023. I ended up giving away six stands worth -- three were posted earlier. Here are my final three, finished literally the day before I had to pack up everything to take to ATC. Everyone who got one has said they appreciated the prize, and I've seen on Facebook that some have even been used in battle already! That's great to see.

    A Muslim general painted up with leftover miniatures I had from my Gripping Beast Moorish army

I like to pick up the figures I use for them at the Historicon booth of Cotton Jim's Flags. He always seems to have some Gripping Beast metal miniatures on discount. If I'm buying something to give away, it only makes sense to reduce what I pay. Somehow, I was able to reduce the time it took me to paint this batch of nine miniatures. I finished them and created their banners in Photoshop in about half the time the previous batch took me. Of course, deadline pressure sometimes can do that!

    I used Gripping Beast's 'Attila the Hun' miniature and a 'Saxon Warlord" for this Eastern warlord

I really liked how all three came out, and I hope those who won them feel the same, too. I tried to paint a variety of nationalities so people could find something they had an army to match. At the same time, I tried to paint them relatively generically so that they would fit with more than one army. 

So, look for these three stands being used in games of Saga somewhere, sometime...!

Warlords Gather from Near and Far to Battle at Advance the Colors 2023

 

    We had 24 players on Saturday for the 'Age of Melee' tournament and 14 on Friday for Ancients

Earlier this year, I decided to add a second Saga tournament at Advance the Colors. Joining Saturday's open "Age of Melee" tourney would be an "Age of Ancients" one on Friday. My hope was that players from further away might be willing to come for the weekend if they could be guaranteed two days of Saga fun. Judging from where some of our attendees drove or flew in from, I would have to call it a success.

    For many, it was their first time facing the multiple elephants of Daniel B's Indian army

I had players attend from South Carolina, Arkansas, and Tennessee. Two were international from Toronto, Canada. We also had our usual players from Ohio and Indiana (and even one from Michigan, this time). I had 14 for Ancients (Age of Hannibal and Alexander books), and 24 for Age of Melee. Of my 14 participants on Friday, 11 of them also played on Saturday. So, on a technicality, we DID grow from last year's 24 players (having 27 unique participants). I was hoping Saturday's tourney would break into the 30s, but who knows? Maybe next year!

    Dan Neal's Persians won "Best Painted" on Friday in the Age of Ancients tournament

I think Age of Ancients is a valid choice for a theme tournament. It will be made even better when Age of Caesars is released (2024?). I think I counted 9 of the 14 were "Greek-ish," whether actual Greek Cities, Graeculi, or Successors. There was only one Republican Roman player and no Carthaginian, Numidian, Iberian, Thracian, etc. That was a tiny disappointment -- I like seeing a variety of armies at a tournament. We did have Indians and Persians, though. I don't think that's surprising, though, as both armies are highly regarded among experienced Saga players. 

    Bob Boggs' Asiatic Successor army went 3-0 and won Friday's 'Age of Ancients'

I did my usual dividing of players into two pools -- a "local" and "visitors." My reasoning for this is to ensure players face as many opponents that they usually don't game with as possible. Thus, winning "local" players would face winning "visitors" in the second round, and the same for ones who lost. There was a little bit of fudging, of course. The locals were outnumbered by the visitors (which is a good thing because the more people come from far away the more it means we're growing!). So, I co-opted my friend Jason from South Carolina onto the home team as he grew up in Ohio. Rusty and James joined the locals, even though they don't usually play against our Saga Ohio players. You get the picture, though. I was happy that I was able to keep the home vs. visitor matchups going pretty much through all three rounds.

    Anthony Adams, left, had a very successful weekend going 5-1. He plays Lowell & his Graeculi

I had a ton of prize support. Gripping Beast shipped in boxes of miniatures from England. The ever-generous Jeff Gatlin of Shieldwall Gaming provided lots of prize support, both miniatures and gift certificates. Cotton Jim Flags sent four Saga books. Father and Son Gaming donated MDF Saga measuring sticks. Sword & Scabbard Games donated two sets of their unique sets of 3-D printed markers for Saga. Arriving after I'd left for Springfield and ATC were six very generous gift certificates from Badger Games. I sent them to the top three finishers of each tournament electronically, so they go double prizes! And of course, Saga Ohio (in this case, me!) donated six custom-painted warlord stands. I also shelled out some of my own money to make sure everyone got a prize by purchasing stuff from the vendors present at ATC 2023.

    Lots of smiles and Saga action going on amongst the tables at Advance the Colors

How did the tournaments turn out? They went VERY well, according to the feedback from my players and my own judgement. Most the players went out of their way to thank me and praise how the tournaments ran, which was very gratifying. I'd spent many, many hours preparing for this weekend. The fact that all seemed to have a good time makes it worthwhile, and gave me a deep sense of satisfaction. I fully realize that the Saga tournaments at ATC are among the largest in the United States. It speaks to the dedication of our local Saga Ohio players and the camaraderie with the Ft. Wayne and Indianapolis contingents from neighboring Indiana. Without those guys, our tournaments would lose some of their luster, and I thank them for their continued support of events here in Ohio.

    James Tolbert's Greek Cities: Spartans hurl themselves upon their Gallic opponents

Here are the full results of the Age of Ancients tournament on Friday. The battles we played were, Rescue the Hostages (my own adaption of a scenario we played this summer at Historicon), Desecration, and Clash of Warlords. Congratulations to Bob Boggs and his Asiatic Successors army for winning the tournament!

1. Bob Boggs, Asiatic Successors, 3-0 (88 points)

2. Dan Neal, Median Persian, 3-0 (61 points)

3. Anthony Adams, Greek Cities: Spartan, 2-1 (40 points)

4. Edgar Gillock, Greek Cities: Athens, 2-1 (40 points)
 
5. Jason Mirosavich, Indian, 2-1 (30 points)

6. James Tolbert, Greek Cities: Sparta, 1-1-1 (48 points)

7. Scott McPheeters, Achaemenid Persian, 1-1-1 (37 points)

8. Lowell Lufkin, Graeculi: Syracuse, 1-2 (71 points)

9. Jim Deppen, Republican Romans, 1-2 (67 points)

10. Doug Dunn, Gauls, 1-2 (65 points)

11. Shea Dunn, Gauls, 1-2 (55 points)

12. Andy Swingle, Greek Cities: Athens, 1-2 (49 points)

13. Charlie Clay, Greek Cities: Athens, 1-2 (37 points)

14. Rusty Parker, Graeculi: Epirote, 0-3 (52 points)

    The Ancient armies looked great on the tabletop, and the players seemed to really enjoy the theme

Best painted army was won by Dan Neal, who received a $25 gift certificate from Shieldwall Gaming. Dan also went 3-0, but was out-pointed by his gaming buddy Bob. So, it was an appropriate consolation, imagine.

    Ed G drove from Tennessee for the convention and plays against Andy S - founder of Saga Ohio

Saturday was the bigger day for participants, of course. My Age of Melee tournament began at ATC in 2021 with 16 players. Last year, we had 24 players, and this year we equaled that with another two dozen. I have to remember to ask for more space next year because if we had any more players, I would have had to scrounge extra tables from the convention staff! 

    Top tables in the final round: Anthony vs. Joe D (Huns vs. Mongols!) left, and Charlie vs. Shea

Here are the full results for the Age of Melee tournament, below. The winner was Shea Dunn, who drove down with his dad Doug. Shea was playing Irish and was entering his FIRST TOURNAMENT EVER! The 23-year-old has been playing less than a year, and overcame staunch opposition to come out on top of a pile that included many, many winners of previous tournaments. I have to admit, it was hard not to pull for "the kid" -- especially since he's such a nice guy who always has a smile and is there to have fun. Best painted was Charlie Clay with his Persians. Charlie has been the true Saga nomad enthusiast, traveling around the country for work and bringing his Saga armies with him. He seeks out games with local clubs and has become quite the ambassador for the game. Charlie won a 4-point Gripping Beast Gallic starter army box from Shieldwall Games. Congrats to both Shea and Charlie!

    Beautiful armies, beautiful banners, and lots of spectacle on the tabletop throughout the two days!

1. Shea Dunn, Irish, 3-0 (116 points)

2. Anthony Adams, Huns, 3-0 (99 points)

3. Lee Parker, Milites Christi, 2-0-1(85 points)

4. Jason Mirosavich, Scots, 2-1 (86 points)

5. Charlie Clay, Achaemenid Persians, 2-1 (82 points)

6. Jim Randall, Byzantines, 2-1 (79 points)

7. Scott McPheeters, Irish, 2-1 (78 points)

8. Jim Deppen, Welsh, 2-1 (78 points)

9. Joe Dihrkop, Mongols, 2-1 (72 points)

10. Eric Morrow, Greek Cities: Spartans, 2-1 (68 points)

11. Edgar Gillock, Anglo-Saxon, 1-1-1 (71 points)

12. Daniel Broaddus, Indian, 1-1-1 (67 points)

13. Mike Zajchowski, Carolingian, 1-1-1 (67 points)

14. Dan Neal, Baltic Crusaders, 1-1-1 (65 points)

15. Bob Boggs, Byzantines, 1-2 (78 points)

16. Doug Dunn, Gauls, 1-2 (74 points)

17. Jason Stelzer, Romans (AOI), 1-2 (72 points)

18. Benjamin Barber, Pagan Peoples, 1-2 (66 points)

19. Phil Keifer, Welsh, 1-2 (64 points)

20. Dave Eblin, Romans (AOI), 1-2 (44 points)

21. Joseph Merz, Gauls, 0-2-1 (72 points)

22. Mark A. Bishop, Franks, 0-2-1 (49 points)

23. Lowell Lufkin, Anglo-Saxon, 0-2-1 (48 points)

24. Karen Metz, Viking, 0-3 (64 points)

    What Saga is all about -- two warbands striving to overcome each other on the battlefield!

A special thanks to my "odd-man out," Joe Merz, who cheerfully volunteered to be my extra in case I had an odd number of players. I didn't need him on Friday, but I did on Saturday, and appreciated his stepping in and playing. 

    The thing I enjoy most about a tournament is seeing all the armies arrayed & meeting the people

There have been a LOT of tournaments in our area this year, but there IS one more. Those who can make it to Ft. Wayne, Indiana, can participate in the Rumble on the Rivers. Join the always-fun Ft. Wayne group and our Saga Ohio contingent who will be heading over to join them. Here's the link for the convention.  

    The somber, black-clad Hospitallers of Lee Parker's Milites Christi held down 3rd place Saturday

I hope you enjoy the pictures of the beautifully painted armies the players brought. It was a pleasure for me just to walk around and admire them. Thanks to all the players who attended, and to HMGS Great Lakes for providing us the venue for our third annual tournament(s).

    Anthony's Huns vs. Joe's Mongols -- lots of horses riding to and fro on the battlefield!

    Charlie's best-painted Persians take on an elephant in the Age of Melee tournament

    "For Sparta!" Greek Cities of both Athenian & Spartan variety proved very popular all weekend

    Greeks vs. Gauls -- historical matchups were common in Friday's 'Age of Ancients' tourney

    Republican Romans feeling awfully lonely in a field of Greeks, Greeks, and more Greeks!

Some Miniature Building Authority (MBA) Middle Eastern buildings

    Two resin buildings from Miniature Building Authority - including a shawarma shop!

I have been so busy that I have had little chance to update this blog, lately. There are a number of things that I have finished off in my "crunch time" before Advance the Colros 2023. One of those has been a pair of Middle Eastern buildings from the quality resin terrain line Miniature Building Authority. I chose two small buildings in a vain, last-ditch attempt to get all of what I bought from MBA at last ATC completed before this one rolled around!

 

    The shawarma shop on the left is named after my friend Andy, of course!

One of the buildings is their "Ice Cream Shop." Of course, being me, I decided to change things up. I made it a Shawarma stand. I like to name my buildings after my gaming friends, so my buddy Andy got the honors on this one! In hindsight, I wish I had colored the background of the signs. As I mentioned, I have been pressed for time of late so ended up cutting a corner here. Still, I like the way the building came out. MBA makes high quality buildings and their line of Middle Eastern buildings are top notch.

Metal bits were done in a steel color with pewter highlights, but otherwise, these were quick to paint!

These were very easy to paint. I spray painted them black first. Then I dry brushed them with a medium brown color from Howard Hues called "Camo Brown.? I added in successive highlight colors of Khaki and white. I finally picked out wood and metal highlights. But honestly, these buildings paint up so quickly that you'll get them ready for your tabletop in no time at all!

    I highly recommend buildings from Miniature Building Authority!

The other building is called "Small Middle Eastern Building II" on the MBA website. It is a good example of their two-part ruined buildings. The top 2/3's of the building lifts off, leaving a ruined foundation and stubble of walls on all four sides. When you place the top back on, the crack delineating the join between the two pieces looks very natural. It's a great way to get two buildings, essentially, for the price of one. It was painted exactly as the other building and should look good for my modern games. What's more, I think it will look fine for even Sci-Fi games. So many of the Star Wars movies feature that desert look, and I think these will go perfect for that period, as well...