Resin Bunkers from MBA for Vietnam Project

    28mm NVA Jungle Bunker available from Miniature Building Authority - you can see fig inside

I picked up these four resin bunkers and sniper positions at Historicon 2025 from Miniature Building Authority. Not that every game is going to include a bunker, but the North Vietnamese and Viet Cong did use them, and they were usually well-camouflaged, making it hard to see them. My plan was to have them "appear" on the tabletop when a light machine gun Event Card is drawn in my Surviving 'Nam rules. Same with the sniper positions, though I may need to purchase a prone figure or two to have them and their base actually fit inside the position with the roof on! Oh, no -- just when you thought it was safe -- more purchases! 

    Coconut Log MG Bunker from MBA (originally made by Acheson Creations) with some VC figs

These 28mm pieces were originally produced by Acheson Creations, and Kirk at MBA has picked up them up and carries them on his website. All of the pieces came with detachable roofs. I purchased the Coconut Log Bunker, NVA Jungle Bunker, and two of the Sniper Positions. I'm a big fan of Acheson pieces, but have learned by now that you MUST do something to get of the mold release agent. Otherwise, your paint will bead up like rain on a newly-waxed car -- or pull away and bubble. My method is to put them in the dishwasher with soap on a low heat, light wash cycle. Next, I prime them with Krylon Fusion Acrylic black matte spray paint. The final step before painting is to go over the surface with a 50/50 mixture of black craft paint and water, to ensure all crevices are fully filled.

    U.S. soldiers investigate MBA's 'Sniper Position' - it blends in well with my Jungle Scatter pieces!

Typically, Acheson pieces are a snap to paint up. Sometimes, it is only 3-4 colors on something and you're done, except for flocking. These were a bit more complex, though. I decided to do the wooden log construction of the bunkers first. I did a wet brush of dark brown, letting them dry overnight. Then, I did two highlights -- the first in Howard Hues Camo Brown and the second in Khaki. I'm always happy with the wood look this color combo gives, and these were no exception.

    A V.C. machine gunner inside the Coconut Log Bunker with the roof off of it

Next up, I went to work on the very thick vegetation molded onto both the roofs and the bottom parts of the positions. I decided to go with a three-color approach. First, I painted it all in a very dark green craft color that I have. After drying overnight, I did a medium green dry brush. These pieces are excellently sculpted, and have nice deep grooves in the palm fronds that are perfect for dry brushing. The next morning I put on the final very light green dry brush -- applied lightly. I really liked how the vegetation looked at this stage, and think it will blend in nicely with the model trees I use on the tabletop, which was a concern I had originally.

    The bottom part of the NVA Jungle Bunker comes in two pieces, with the roof as a 3rd piece

The final detail on the pieces were the boulders or large rocks modeled into the vegetation at various points. In carefully looking over these pieces, I found that I had painted a number of the rocks green thinking they were vegetation instead of rock. Even after I thought I was done, I found more of them! I did a three-color approach to these, as well. I used a Charcoal craft paint as a base coat, then a medium and finally light gray dry brush highlight. At this stage, everything was painted. I liked how they looked, but definitely wanted to do a wash on them before flocking. 

    MBA's 'Sniper Position' with palm frond roof off of it - the inside portion is too small for my figs!

In the end, I did two washes. For the vegetation, I used a dark brown vehicle wash from Vallejo. In creating my jungle scatter pieces, I had toned down the green plastic of those with a brown wash. I felt that doing a brown wash on top of the vegetation on the bunkers would give them a similar look to the scatter pieces. I was glad that I made that decision. I think the brown-washed vegetation looks great! Next, I did a black wash on the rocks and wood. The last step would be flocking, and like everything else with these bunkers, it would be multi-step and more complex than usual.

    Side view of 'NVA Jungle Bunker' - you can see the separate back wall better in this photo

First, I had to paint all of the earth that was showing. I used my usual craft brown paint. This was fiddly in some places, as I had to pick out the brown between individual palm fronds or rocks. Some modelers might have painted the earth first, in the time-honored paint "inside out" approach. However, I was afraid I would have too much splash over with the wet and dry brushing of the vegetation and boulders. Of course, I could have done the earth first and then gone back and just touched up the mistakes. If I were to more of these pieces, that's probably the method I would try next. 

    'I'm not going in there...YOU go in there!' -- a close up look at the front of the Sniper Position

Once the earth color had dried, the time for flocking had come. I have an old Elmer's glue bottle that I keep filled with half white glue, half brown craft paint (the same color I use for the earth). Once again, I carefully brushed this onto the brown earth spots, and then poured over Woodland Scenics Blended Turf. I tapped off the excess, and then used a makeup brush and a soft paint brush to whisk off the excess flocking from the leaves and boulders. I seized the chance of a borderline low humidity that day to spray the flocked pieces with Krylon clear matte.

    This look at the roof of the NVA Jungle Bunker gives a good picture of the intricate detail

The final step in the flocking process was to add patches of Woodland Scenics Blended Green Grass in irregular patches to the turf. It is a similar process I use for many of my bases, and I like the effect it gives. Like with my miniature bases, I also glued on a few tufts here and there. And leaves! I am really liking the touch that miniature leaves give to figure bases and terrain flocking. Now, I just need to find another source of them before I run out. One final spray coat and these bunkers are done! Well...they were supposed to be done. I wasn't 100% happy with how the roofs sat on the bunkers. I swore they fit nice and snug before I primed and painted everything! However, they seemed a little wobbly after it was all done. So, I decided to add a layer of black felt to the bottom of the roofs. Not only would it essentially be invisible when the roof was sitting on the bunker, the felt material should both snag and cushion the posts a little, and help them sit a little more secure. That is the hope, at least!

    Front of the Coconut Log Bunker -- you can barely see the flesh of the prone machine gunner inside

I'm very happy with how these bunkers and sniper positions came out. I'm so glad that Kirk from MBA has kept some of the incredible Acheson terrain line in production. If you need a few bunkers for either Pacific theater of World War II or Vietnam, I highly recommend these!

    Top down look at a Sniper Position which shows the dry brushing on the palms fairly well

So, what else is on my painting desk? Since terrain is often a "do a little bit and let dry overnight" kind of pace, I have been working off and on the last five Fantasy Fishmen I had primed and ready to go. They're off to a great start and are pretty far along. After that, I have some decisions to make as far as miniatures go. I can begin painting my horde of 28mm metal Orcs and Goblins, or I can do up a few batches of miscellaneous stuff I've been wanting to get done eventually. My guess is it'll be Orcs and Goblins, but we shall see!

    Last look at the NVA Jungle Bunker with 2 of my 28mm 'Black Sun' range NVA troops

MINIATURES Acquired vs. Painted Tally for 2025

• Miniatures acquired in 2025: 288
  
• Miniatures painted in 2025: 167

TERRAIN Acquired vs. Painted Tally for 2025

• Terrain acquired in 2025: 36
  
• Terrain painted in 2025: 61

SCATTER Acquired vs. Painted Tally for 2025

• Scatter acquired in 2025: 115
  
• Scatter painted in 2025: 150