Tuesday, August 5, 2025

3-D Printed Canyon Rocks & Stacks from Diabolical Terrain

    Battle droids prowl the canyon lands of Tatooine among 3-D printed pieces from Diabolical Terrain
A big part of my advance purchase that I picked up at Historicon from Diabolical Terrain were these desert terrain pieces from his Canyon Rocks & Stacks range. I wanted them to supplement the Desert Rock Formations that I had painted up awhile back. I now have 17 of these printed in 32mm scale, so should be set for any of my Star Wars skirmishes that I set out in the outback of Tatooine! 

    These canyon rocks and stacks certainly evoke desert terrain out west, such as Arches National Park
They are incredibly easy to get ready for the tabletop, too. I began -- as I did with the first batch -- with sand-colored Camouflage spray prime from Menards. I must not have sprayed it on as thick as I did with the first batch, because I did have to go back and do a base coat on top of the priming in a craft paint khaki color. Or maybe there are more grooves and crevices in this batch than the first. Who knows?

    I love how the erosion lines paint up quickly with a simple base coat, dry brush, and wash
Either way, I let them dry overnight after that. Next, I did a white dry brush highlight with a wide, stiff-bristled brush. If this is sounding familiar, it is exactly the same recipe as for my Tatooine buildings! Some of these are fairly big pieces, so I had to be careful to not smudge the areas I'd already dry brushed as I went all the way around each piece. Once again, I let them dry overnight before the next step.

    The contrast between the two styles of pieces -- stacked rocked look and eroded look
The final step besides a clear coat spray was to go over them completely with my Vallejo brown vehicle wash. I was worried that the massive surface area of the eight pieces would deplete my bottle completely and force me to mix up a new batch with the restock I picked up at Historicon. However, it did not -- there is still some left in the pre-mixed (watered down) bottle I made last summer. Now, the problem is that I don't actually remember what my ratio or formula was for Vehicle Wash to Water. Maybe I'll go back and read some of my blog posts to see if I mention it? I looked on the bottle cap (where I usually write these things down in Sharpie), but there's nothing there. 

    Few things are more Star Wars iconic than creatures riding huge beasties -- so this fig was a natural
Anyway, I really like the effect this dark brown wash gives on these pieces. It gives  the surface a nice kind of glow that you sometimes see in photographs of the desert southwest. Speaking of which, some of these are dead ringers for the terrain you see in Arches National Park. I'm sure that is intentional, so these pieces would also look great in a Western game set in the appropriate desert lands. The pieces actually break down into two types of surfaces. One is very craggy and like piled rocks (stacks?). The other is smooth and eroded with parallel lines carved into them by wind or water. Geologically, I'm not sure which it is -- I just know I've seen some amazing photos of these types of rocks out West!

    These battle droids are on the hunt for the Empire's enemies, tirelessly trekking the sandy planet
I really like how these turned out, and now I'm wishing my next Star Wars scenario was set in Tusken Raider land or something. Instead, it is a city scenario using the additional "Tatooie" (as the website calls them) buildings I bought from Diabolical at Historicon. Oh well...next game! Still, if you are currently doing Star Wars skirmishes with your group, you can definitely use some of theses for your games! They are reasonably priced and you can scale up or down what size you want them printed in (with the price going up or down, too, of course!).

    No sign of the Rebels here! Terrain pieces like these are where 3-D printing excels, I feel...
So, what's next on my paint desk? Well, speaking of Star Wars, I'm working on a batch of six civilians that I pieced together from the various Stargrave plastic sets I've purchased. They're about half done and will be needed for the upcoming game near the end of the month for our next game of Space Weirdos. The resin bunkers and sniper positions from Miniature Building Authority are still primed and awaiting their first coat. After that, I would like to polish off those five additional fishmen I primed up awhile back. Otherwise, if I jump from here into painting my Dragon Rampant fantasy troops, they'll be giving me the stink eye the whole time: "Hey, Bub! What about us? Youse said we's was next...!"
    A final look at the atmospheric 8 Canyon Rocks and Stacks that I just painted up

MINIATURES Acquired vs. Painted Tally for 2025

  • Miniatures acquired in 2025: 288
  • Miniatures painted in 2025: 161

TERRAIN Acquired vs. Painted Tally for 2025

  • Terrain acquired in 2025: 36
  • Terrain painted in 2025: 57

SCATTER Acquired vs. Painted Tally for 2025

  • Scatter acquired in 2025: 115
  • Scatter painted in 2025: 150

8 comments:

  1. I really like the look of them, nice work on the painting too, they also remind me of the scenery they used a lot in the classic Star Trek series.

    ReplyDelete
    Replies
    1. Oh, that's true -- I'd forgotten that Star Trek had many planets with those big rock formations. Thanks!

      Delete
  2. I think they look great Mike, perfect for Star Wars/Sci-Fi or any Cowboy type game. Great paintjob too.

    ReplyDelete
    Replies
    1. Thanks, Ray! They were certainly easy to paint up. More time consuming than anything, with some having fairly large surface areas.

      Delete
  3. Outstanding, Mike. I should pick some of these up myself.

    ReplyDelete
    Replies
    1. Definitely -- I think you'll be happy with them. There are two lines that go together very well -- "Desert Rock Formations" and "Rock Canyons and Stacks."

      Delete
  4. Really nice scenic pieces, perfect for Star wars

    ReplyDelete