New Frostgrave Warband: Raccoons

Splintered Light Miniatures Raccons explore a ruined city

I am steadily fleshing out the warbands of Splintered Light Miniatures animals available to my players in my upcoming Frostgrave: Ghost Archipelago campaign. So far, Badgers, Pine Martens, Bears, and Jungle Rats are ready to seek treasure among the islands of the South Seas. Adding to that list is this Raccoon warband.

Front and rear views of the warband's Heritor and Warden

There is a pretty wide variety of poses and armament in the SLM Raccoon line. Appropriately enough, their clothes are in a "pirate" theme -- with head scarfs sashes, and fancy jackets. I am not sure, though, if there is one obvious commander figure for the Heritor. So, I chose this one, mainly because of his dashing but faded, green waist sash. It seems to make him stand out a bit from the pack. I didn't have a lot of choice, though, for the warden figure -- if I wanted to be strictly accurate. The rules say wardens don't carry a shield or wear armor. So, I picked this guy -- the only one I had unpainted that didn't have a shield -- for the warden. To make him stand out as the warden, I painted up an Iron Wind Metals animal as a raccoon and placed him on the base alongside the warden. I don't think the casting is really of a raccoon, but it is a small, furry creature. Painted up like a raccoon, with the distinctive bandit mask of black on the face and ringed tail, it does the trick.

Raccoon crew checking out some overgrown columns in the ruined city

The crew were also painted in similarly faded, pirate glory. I love the striped stocking caps or head scarfs. They add a lot of character to the figures. I tried to also give them a look of bright colors that have faded with too much exposure to sea and sun. As far as size goes, the SLM raccoons measure about 16mm from sole of foot to tips of heads. They are a bit stocky, though, so they don't look out of place up against the other animals I'll be painting up. They're shorter than the bears and pine martens, but about the same height as the jungle rats.

I'll be taking a short break from the Ghost Archipelago warbands to paint up a batch of 20mm Cubans for my upcoming Wars of Insurgency scenario. I'll be running a game simulating a skirmish during the counterattack by South African and UNITA forces after they had repulsed the Angolan army as part of the larger battle of Cuito Cuanavale.

New Frostgrave Warband: da Bearss!

For my upcoming Frostgrave campaign, I had some warbands that had a few figures already painted. "Da Bearss" (nod to an old Saturday Night Live skit) is one of those. And yes, I am tempted to name the leader "Ditka" -- but I'll leave that up to the player who decides to use this warband! The two figures that I will be using as crew were completed previously as part of a Lead Painters League entry. The others are all new, though.

The Bear warband's Heritor and one of its warriors -- a Ral Partha Grizzly Bear

First up is the Heritor and a Ral Partha 25mm Grizzly Bear. I will use pretty much normal crew stats for the Grizzly, perhaps making him a Specialist hand-to-hand type. I love Ral Partha (or Iron Wind Metals, if you prefer) animals. They are realistic looking and are great size to mix with the Splintered Light Miniatures that will make up my warbands. The Grizzly ("Butkus"?) was easy to paint up. A dark brown base coast was followed up with a Camo Brown dry brush. Khaki highlights were then dry brushed in. I then went back and darkened the legs with black dry brushing. He looks effective and fierce, I think.

I hand-painted the Heritor's shield, though the shield itself is a modification of the figure

I chose this figure as the Heritor, though truthfully, all of the SLM Bear miniatures are impressive looking. I picked him mainly because of his heavier armor. I don't know why, but for these figures I like to do leaders with polished bronze armor -- using some gold paint for highlights. I used steel chainmail, though, to give him an interesting composite mix. The shield is actually a modification of the SLM figure. There is a peg hole in the back where a scabbarded, two-handed sword is supposed to go. I decided I would give him a shield in case the player controlling the warband wanted his Heritor to have more armor.

The Bear warband's Warden -- love the two-handed warhammer!

Next up is the Warden, a bear swinging a seriously impressive two-handed warhammer. I picked him for the warden because they are technically not supposed to wear armor. This figure has only a couple shoulder pieces and an arm brace, so "close enough," I say! I decided to go with a rust color for the bears' eyes in this warband. The original paint job on the other two had black eyes with tiny white points to be light reflecting off, but it looked too maddened and crazed to me. I always Google images of animals before I paint them, and bears' eyes seemed to be this honey brown color in the images I found.

The Warden's familiar - a Ral Partha brown bear that, ahem, barely squeezes onto his base with him

I've also begun placing an animal on the base of the wardens as a "familiar." It will make it easier for players to differentiate the various members of the crew on the tabletop. Since I'm using what Splintered Light Miniatures makes, I don't quite have the variety and choices that a human warband would have! The bear is a Ral Partha 25mm brown bear - quite a bit smaller in size than the grizzly. I painted him up similarly, though. He should probably be a bit darker to be a true brown bear, but I like how he turned out nonetheless. He did j-u-s-t fit onto the base with the Warden.

The warband's crew members -- both were previously painted up and based (though I added the tufts)...love the guy holding aloft he axe - you can almost hear him roar!

Here are the previously painted figures from two separate Lead Painters League entries. One is armored (once again, bronze plate armor) and the other less armored. I was tempted to cut off the axe head of the unarmored one, fashion it into a staff, and make him the warden. But honestly, it is such a freaking cool figure! I love the way he's holding aloft that two-handed axe...you can almost hear him roaring a challenge to his enemies. So, I just couldn't bear (sorry) to mutilate this pose. Both poses are great -- I also love the giant, two-handed morning star. The sculpted, bronze cuirass is pretty cool, too.

These are the tallest SLM figures I own. They measure about 29mm from the soles of the feet to the tips of their ears. They tower over some of the other animal lines -- especially the mice and squirrels. The badgers aren't too much shorter, and their wolverine figures rival them in height, but fall a bit short (as U of M Wolverines tend to do...ha, ha!).  I really like this warband, though -- it is probably my favorite of the ones I've painted.

SE Asian Jungle Ruins: Staircases, Statues, & Columns

A row of statues of ancient warriors being slowly reclaimed by the jungle

Here are some more jungle ruins I created for my upcoming Furgrave (Frostgrave:Ghost Archipelago) campaign. I'm really happy with how they turned out.  I decided to do some research into what a temple ruin looks like when found in the jungle to get some ideas for small pieces to scatter here and there about the board. I pulled out a book I'd bought long ago about Angkor Wat called, "Angkor: Heart of an Asian Empire" by Bruno Dagens. This small paperback has a wealth of paintings, sketches, and photographs of the Cambodian temple complex when Europeans first stumbled upon it. I grabbed a post-it note, and began to leaf through the pages, writing down notes like, "Lion on pedestal," "Row of warrior statues," "Staircase," "Pools," and "Bridge."

This 1995 book by Bruno Dagens was the inspiration for this batch of terrain

Next, I went through the various boxes and ziploc bags of figures and terrain items, waiting for inspiration to strike. I had the Hirst Arts plaster terrain that my friend Tim had given me earlier this year, which included lots of stone pediments of various sizes and shapes. I got the idea to assemble a staircase out of these. On either side of the staircase, I would have a statue on a pedestal. Looking through my lead animals, I found a pair of Iron Wind Metals 25mm lions. They were rearing and striking out with a paw and looked perfect for the part. I needed to make the steps wide enough that my 1" figure bases could fit on them, so I pulled a bunch of pieces out and decided on three steps. I decided that the jungle had overtaken whatever the staircase led to and would simple glue on foamcore and set various plants into it.

Construction done on the ruined staircase

It took only an evening's work to assemble the staircase, simultaneously doing the other three pieces below. I used Tacky Glue to hold the plaster pieces together, and epoxy for the lions atop their pedestals. I like how building it up with various layers of the pavement pieces gives it a worn and deteriorating look. You can see the blue foam core, which I trimmed to a slop with an X-acto knife behind the statues. Once assembled, I spraypainted the entire piece matte black.

The finished ruined staircase - note the model railroad bushes (pink, red, yellow) glued into the ruins itself before flocking.

Since spray paint never seems to get into all the crevices of plaster or resin terrain, I coated the entire piece with a 50/50 mix of acrylic black paint and water afterwards. It sat out to dry overnight, sinking into all the recesses and shrinkwrapping itself onto the stone cases. This made it easy for the next step, which was dry brushing. First came a medium gray dry brush, then a lighter gray in highlight areas. Then I turned to the foam. I pulled out a handful of wire small trees and shrubs from the model railroad terrain lines out there. I poke a hole in the foam and then filled it with Tacky glue. The wire stems were inserted into there.

Another picture of the staircase - I love the way the lion statues on either side set off this terrain piece!

The ground flocking came next. I painted the areas that would be covered by grass with white glue, sprinkling on Brown medium railroad ballast. This was followed up by a 50/50 glue and water coating on the ballast, which was sprinkled with Woodland Scenic Turf Earth. The next layer was more Woodland Scenics blended green turf. Finally, various pieces of clump foliage were glued to the ruin, in cracks in the pavement, leading up the sides to represent the advance of the jungle, and onto various pieces of stone.

The two rows of warrior statues assembled

I really liked the idea of a row of warrior statues on an extended pedestal -- perhaps used to line a walkway to a temple? However, I had no suitably scaled SE Asian figures (all of my Ancient SE Asian armies were in 15mm). When digging through my various bins of unpainted stuff I found a bag of plastic figures of warriors from different periods from history. I think they belong to a board game called "Mythology," maybe? Even though they weren't technically Asian, I thought they'd look good as statues.

Squirrel adventurers explore a temple complex guarded by a row of warrior statues

Once more I assembled the pedestals using Tim's generously donated Hirst Arts plaster blocks. I decided to go with two rows of 4 statues. I would base them as two separate pieces so I could either have them facing each other in an entrance way, or create one longer walkway. I used the identical method to prime, paint, and flock the two warrior rows. I was really happy with how they turned out. Now, I'm thinking I need to make a row of paving stones to create an overgrown walkway alongside the statues to really make the piece jump out on the tabletop!

This was perhaps the easiest of all four of the pieces to assemble -- the wooden pegs make great columns, I feel!

Finally, I thought of creating some random groups of columns to show portions of temples or buildings peeking through the jungle. I had in my previously purchased boxes a half dozen wide, wooden pegs that look for all the world like fluted columns. I decided to take more of the plastic figures from the Mythology game and place them atop the pedestals on the columns. More Hirst Arts plaster pieces, and some smaller bits atop the columns, and this piece was assembled and ready for painting.

Looming from the jungle, a row of 3 columns marks the location of an overgrown building to be explored

Painting and flocking was done identically as above. I am thinking that it would be neat to have a number of these types of pieces for the tabletop. It would be especially cool to have some pieces with random, tumbled columns, or broken statues on the ground. Definitely food for thought! An added bonus is that I purchased nothing for these pieces -- it was all stuff I had sitting around in my collection, in various drawers or closets.

Frostgrave Warband: Badgers!

I feel I am making good progress at getting my Frostgrave project closer to the tabletop and our first game. Tonight I finished up another warband -- Splintered Light Miniatures 28mm Badgers. These are some really nice figures, I feel. Unfortunately, four of them were the same pose. So, I put my skills to the test on making them look different. I think I did a pretty good job at giving them the appearance of variety.

The Badgers' Heritor leader, left, and their spellcasting Warden (and familiar) right

 First up, are the warband's leader (Heritor) and its Warden (spellcasters). The leader is the guy on the left with the giant morning star held over his head. Although the lighting in my photo doesn't show it, his surcoat is a deep purple. I actually snagged this miniature from my friend Keith Finn in a trade because it looked like the perfect leader figure for this warband. Alongside him is my favorite figure of the warband (or should I say figures?). I love this Badger pointing as if he's casting a spell or about to hurl a blast of magical energy towards an enemy. What makes it all the better is the tiny, unclothed badger in a mirror pose. This small badger was a giveaway from David McBridge of SLM, tossed into a purchase I made at a convention. What better figure for a tiny familiar than this one? As soon as I got these figures out in preparation for painting, I thought I had to put the two of them on a combined base. He has magical symbols painted on his lavender tunic, with the largest one on the back (which you can't see in this pic).

A Badger archer and axeman investigate my newly-produced ruins pieces looking for abandoned treasures

One of the modifications I did to the figures was add a bow strapped to the back of one of the Badger Axemen. As you can see in this picture, I did a very medieval looking surcoat over the armor that the figures wore. Some of the armor I painted in bronze mail, the others in steel chain. I gave them a checkered pattern on their surcoat, which I thought turned out fairly well. You probably can't tell from these iPhone images, but there is highlighting in each square, as well. The other badger, in yellow and black, was also slightly modified. I converted his double-bladed axe into a single-bladed one. I know, not the most labor-intensive modification, but it does give him a slightly different appearance. Hopefully, with the different color schemes they'll appear less uniform on the tabletop.

I converted the spearmen on the right from the axemen on the left - I like how it turned out!

Finally, the most fiddly of my conversions -- the spearman. I snipped off his axe and added a spearhead to the top and extended the axe handle to the base. It is every so slightly crooked, but then again, miniature spears made from soft metal often end up that way as wear and tear from using the figures! I like how the slight lean forward of the pose looks as if he's resting on the spear, supporting some of his weight. The red, white, and silver pattern is fairly medieval looking, and I like how it turned out, too. His companion axeman in blue and yellow is the only one of the four axe poses that is completely unmodified.

I'll be offering up this warband to my players to use in my Frostgrave: Ghost Archipelago campaign. I definitely like how these figures look. They are some great examples of Splintered Light Miniatures quality poses and castings. Next up on the painting desk is some more terrain -- scratch-built ruins using the Hirst Arts block that turned out really nice!

Christmas ads for First Command Wargames

I had fun making these up -- Christmas advertisements that we plan to post on Facebook and other places. Hope you enjoy them!

Paleo Diet: Clever Use of Fire!

An idyllic day in Cave Man world...about to be shattered by man and his newest tool - fire!

So, we decided to try Paleo Diet again, now that we understood (or think we understand) the helpful benefits of fire when fending off the attacks of nasty beasts we are hunting. Each of the five players had two hunters and one dog. All of chose to have one of our guys armed with fire, while the some chose bows or spears for the other hunter. I decided to give a club a test, considering it was a +1 to hit creatures (the problem being you have to move into contact, unlike the spear which you can shoot at Short range and the bow at Long).

Objective Number One - a rocky outcrop with a pack of four sabertooth tigers

Keith set up a board with a rocky outcrop on one end -- the lair of a family of four sabertooth tigers. He said the predators had been snatching the tribe's infants and young, and the womenfolk had demanded we come back with their skins or no fun around the campfire tonight -- or any other night in the near future! Mike W and Allen were dispatch to tackle the sabertooths, while Joel, Mike S, and myself were to bring down some bison from a herd that had entered our hunting lands. The herd, we noticed, was being stealthily stalked by a shortnose bear and a pack of wolves. So, we would possibly have competition for the meat!

Objective Number Two - a herd of bison that had wandered into our hunting grounds (note the bear stalking them)

We're not 100% sure we're doing the reaction tests correctly, but the way we decided to play it was this:  (1) Hunter rolls his choice of 1, 2 or 3 dice to activate. (2) Any failures are immediately checked for reaction by the closest animals (two failures, two animals; one failure, one animal, etc.). (3) Hunter takes his successful actions, which the possibly triggers possible reactions. We had noticed in our first game that predators will not attack a hunter who is within 1 Medium with fire. So, as long as we don't get split up, our pair of hunters should be fairly invulnerable to attacks...right?

My two hunters, Og and Ugg (with fire) and their trusty hound approach the animals

Hard-luck Allen found out one flaw in our plan immediately. He failed on his first two attempts at activation, prompting the charge by two hyenas who were outside of Medium, but inside of a Long distance. Allen dispatched one and chased off the other, which set the tone for the evening. We were wildly more successful than our first attempt at hunting prehistoric big game. My group ended up being the most successful of them all. Keith had handed me two fairly troglodyte looking figures, which I named Og and Ugg. We snuck through an area of brush (flaming brand in hand), which scattered some woodland creatures and a startled the bison when we emerged from the patch of woods. However, Joel and Mike were in position and we began a game of ping pong, spooking the bison in a circle between our three bands which had surrounded them.

Dashing forward, Og and Ugg strike down a bison with their clubs -- meat on the menu for this evening!

On my next turn, I charged into contact with the first bison and ka-THUNK! Two clubs came down on it and bison burgers were on the menu for the evening! Og, Ugg, and their pooch proceeded to take down three bison. After the hound dispatched the third one, he began howling in celebration, which lasted for three turns (three straight turns of 3 failures on my dice -- ha, ha!). Meanwhile, Og and Ugg decided to go help Allen and Mike W with the sabertooths. We spooked a pachyderm off with our fire, then closed within a good "lope" distance (Long). On my next turn, I rolled two successes for activation, again. We charged in and thwacked the big cat (they're not really felines, are they...?) on its noggin. Both Og and Ugg hooted in celebration. Not only would they enjoy lots of good bison for dinner, but their women would be happy and they would be able to partake in dessert, too!

My hunters pummel a second bison into dreamland, while the hound drags down another

All in all, we were very successful as hunters this time around. No dead humans, though one hound was savaged and killed by a sabertooth. Perusing the rules afterwards, we began to wonder if we were doing it wrong. We were uncertain if the animals are supposed to test reaction after every activation our hunters take. So, if Og gets 3 successes, does he do one activation, then check for reactions before doing his next one? Keith said he would check the FAQ and find out. Otherwise, we are getting a good idea why man was able to become the dominant species!

Elated with our success, we track down and kill a sabertooth tiger, too -- Og and Ugg are unstoppable!

SE Asian Jungle Ruins

Splintered Light Miniatures with Hirst Arts ruins pieces flocked to represent overgrown jungle terrain

Earlier this year, a friend of mine, Tim Peaslee, very generously handed me a box of Hirst Arts plaster pieces of ruins, caverns, boxes, barrels, etc. I quickly painted up the boxes for this year's "That's My USAid!" scenario using my Wars of Insurgency modern skirmish rules. When I decided to begin my Frostgrave: Ghost Archipelago campaign, I pulled the box back out and sorted through the pieces. I organized them by size and the full scale of Tim's generosity finally sunk in. There were a LOT of pieces, here!

A couple merged photos showing what I called the "Single Pieces" -- roughly 1 inch square

I decided to paint up some of them as broken down and overgrown ruins of various temples, palaces, or other stone buildings. There were three basic sizes, and at least two different styles within each size. There were what I called the "Single Pieces" -- small, square ruins pieces about one inch (25mm) square. First, I glued them to a square of styrene or bass wood. Then, I spray painted them flat black. Once dry, I went over the black thoroughly in a 50/50 mixture of glue and water -- my typical method for painting resin terrain. A dark gray then dark dry brush followed. After flocking the bases, I added Woodland Scenic clump foliage to show the ruins beginning to be overrun by the jungle.

The Double Pieces measuring roughly 1"x2"

The Double Pieces were about 1"x2" rectangular sections of crumbled ruins. One of the styles included the stump of a tree growing out of the wall. This was particularly appropriate since you see that time and again in SE Asian ruined temples such as Angkor Wat, in Cambodia.

The Large, roughly 1.5"x3" pieces

Finally, there were the Large Ruins pieces, which measured roughly 1.5"x3". There were two main styles, both of which had a tree stump growing out of them. I suppose I could have hunted and found a tree to fit on the stump and have it be a live tree, but I wanted to keep these pieces quick and simple. They did paint up very quickly. Just as much time was spent flocking the bases as was on prepping, priming, and dry brushing them. They did not take long to paint up, and felt they looked great. The clump foliage glued onto the stones themselves really give them an overgrown look.

Next up is another batch of ruins created with Tim's Hirts Arts. Here I will be assembling pieces to recreate a crumbled down staircase, gallery of statues, and section of columns with statues atop them. Stay tuned!

SE Asian Temples: Two Smaller Temples & a Stupa

Originally built for my 28mm Pulp campaign, these temples will find use in my upcoming Frostgrave one, as well!

This will finish out my SE Asian temples built earlier for my Pulp campaign. For the full thread on how I built them, please check out Southeast Asian Temples (actually, eight separate blog entries -- here's a link to the first): http://leadlegionaries.blogspot.com/2013/10/southeast-asian-temple-part-1-materials.html

I like how these scratch-built temples are mostly made from various bits and pieces that I picked up at the craft store.

These two temples are a great size. I can really see them coming in handy for my Frostgrave: Ghost Archipelago campaign. Expect treasure counters to be located in them regularly!

The second temple, a twin of the first, with Pulp explorers posing in front of it for a photo op

Printed interiors look the part, I felt, and add that extra bit over an all black or blank inside

Round Stupa
A common feature of SE Asian archeological sites are these round stupas, that look for all the world like a giant, stone tea bell sitting on a platform. They are usually solid state with a relic of the Buddha inside. However, being a fantasy/Pulp piece of terrain they HAVE to feature a hidden entrance into the interior (where doubtless great treasure is secreted away!).

A round paper mache box, a craft food finial, some beads, stone spray and voila! A SE Asian stupa!

The upper portion pulls off of its base to reveal a hidden chamber!

SE Asian Temples: The Forbidden Temple

Scratch-built SE Asian temple (warrior statue is from a pet store "lizard aquarium" section)

Here are pictures of what I call the Forbidden Temple. This is also a big temple -- the biggest part being the statue from the "lizard terrain" section of a pet store. To read the blog entries about how it was constructed, go to my blog post on it ("The Forbidden Temple"): http://leadlegionaries.blogspot.com/2014/07/the-forbidden-temple.html

The friezes on the sides are actually are downloaded and printed out on a color laser printer from an Architectural website, and depict Angkor Wat

I called it the Forbidden Temple because it was the one I used in my series of Pulp games in which adventurers were looking for the Eye of the Buddha (found inside). It will see new action on the tabletop when I begin my Frostgrave: Ghost Archipelago campaign soon.

Another shot of the paper friezes glued onto the temple's sides

The interior of the Forbidden Temple - also printed patterns

SE Asian Temples: The Big Temple

Three quarter view showing the entire temple

 Here it is, the grand-daddy of all my SE Asian temples that I have built (so far...?). I call it simply, The Big Temple. Creative, isn't it?

Detailed shot of the roof of The Big Temple

Photo of the interior of the temple with the printed architectural patterns

View of the entrance to the temple and the styrene brick pattern sheet and Hirst Arts blocks entranceway

Anyway, to read how I created it, you'll have to go back to the original thread from 2014: "Snowed In? Build a Temple!" It may seem strange that I am duplicating the finished photos here, but...sigh...there is a reason. My previous image hosting site, Photobucket, has decided to charge more than $400 for "third party hosting" -- in other words, "hot-linking." That's when you upload a photo to their site and link back to it on another, such as a blog. Why Photobucket is essentially committing business suicide, I don't know. No one that I know of will pay that ridiculous amount when there are perfectly sensible free options. Such as a Google blog!