More Large Jungle Scatter Pieces & Miscellaneous

    Some of my 28mm Pulp miniatures posed in front of a jungle made from my new scatter pieces

Here are several things I've been working on that I combined into one update. First, I created another six large pieces of jungle scatter. These are pretty much identical to my first batch, but seemed to go a lot faster. I imagine it is because I had a plan and knew what I was doing...ha, ha! This brings me to a dozen of these larger pieces. One more batch of smaller ones and I will call myself done with jungle scatter -- for now, at least!

    With these six complete, I now have a dozen 3" diameter jungle scatter pieces for my tabletops

I started with 3" circles of birch wood that I picked up at Michaels craft store awhile back. In the center of each, I placed a plastic palm tree. I have an entire box of plastic palm trees, and could easily spare these. I think I picked up long, long ago from Pastimes on the Square at a Historicon or Cold Wars convention. They are a great place to pick up little pieces of vegetation, foam hills, or other scenic bits made from plastic plants or other cheap sources. Once the palm tree was epoxied into place, I a khaki colored dry brush on the trunk. I followed this up with a dark brown vehicle wash and the trunk was suitably "spiffed up." Next, I did a light olive dry brush here and there over the palm fronds themselves.

    Two explorers on a jungle path: "Boy, it sure is hot in this jungle..." "Shut up, kid, and keep up..."

With the central palm done, it was time to flock the base -- yes, before putting on the other plastic plants! Flocking afterwards would be a nightmare, and get all kinds of pieces attached to the plants themselves. I used my usual three-step brown ballast and blended earth and grass turf that I use for my bases. Since cooler weather had returned, I could spray these with clear acrylic matte after this step. 

    A close up of some of the discs with no miniatures tramping by them...

Next, I pulled out all of my plastic plants I'd picked up from either Hobby Lobby or Michaels when I was doing the earlier batches (and even longer ago). I trimmed to size a variety of styles and likely more than I'd need. Next, I used a larger diameter pin vice to drill holes for the stems of the plants and covered it with a blob of two-part epoxy. Then, I inserted the stems through the holes. I would set the disc on a pair of old dice or something so that they were high enough up that the stem wouldn't hit my desk. I would do one plant per disc, let them dry a few minutes, and then drill the next hold in each disc. This assembly line method worked much better than the hodge podge way I did it before. 

    I used a variety of plastic plant types and trimmed them to create a jungle array

I let the epoxy dry for an hour or so before flipping the discs over and trimming off the stems that projected through the base. One final step remained. I grabbed a premixed bottle of brown wash made from Vallejo clear matte and brown that I don't use anymore (I mostly use the vehicle washes nowadays). I slathered this liberally over all of the greenery on each disc, the palm fronds included. This takes the plastic shine off of the plants and gives it a more realistic look, I feel. In any jungle or woods, there are always dying plants. The brown wash gives that effect.

    The neoprene mat I created with fabric spray paint for those six-player, free for all skirmishes

You may have noticed the dark, greenish-brown mat that the jungle scatter and miniatures are sitting on. The cooler temperatures and lower humidity finally gave me a chance to paint a hex-shaped neoprene mat I had created from material bought at JoAnn Fabrics going out of business sale months ago. I had decided to try fabric spray paint to color it (comes light gray off the roll). I mentioned that to my friend Mike S, and he generously gave me two large cans of it, a dark brown and a forest green. I laid a tarp down in the grass outside and gave two coats of dark brown to it first. The next day, I sprayed it less thoroughly with the forest green. I wanted both the brown and green to be showing through, which I think it does. However, it is way darker than I would have liked. I'd be curious to see what others think, though...

    Two bedrolls and a large blanket that looked vaguely "old" to use for my French encampment

The final items are three pieces of plastic scatter from a huge box of Terrain Crate scatter that I bought from my friend Bryan Borgman a few years back. They are from the Crystal Peaks Camp and included two sleeping bedrolls and a large blanket. I will be using these as part of a French camp in my refight of the skirmish at Jumonville Glen at the Ohio History Center, Sept. 7. Our HMGS Great Lakes chapter will be hosting monthly historical miniatures games at the museum to showcase our hobby to passers by. Players and GMs get in free to the museum, and we will have literature on hand to pass out about the hobby.

    "Wait...I hear zee reinforcements are on zair way, mes amis!" My Frenchies awaiting new recruits

I'm happy with the scatter and the blankets and bedrolls -- still undecided on the hexagon mat. Oh, well -- that's how it goes sometimes! Not every idea comes to fruition perfectly!! So, what else is on my painting desk? Right now, two batches of miniatures -- Orc archers for my Dragon Rampant army and six Canadian Militia to reinforce the French side in that upcoming skirmish. Terrain-wise, I am scratch-building my own French & Indian War tents for the scenery in that game, as well. Stay tuned for more!

MINIATURES Acquired vs. Painted Tally for 2025

• Miniatures acquired in 2025: 288
  
• Miniatures painted in 2025: 180

TERRAIN Acquired vs. Painted Tally for 2025

• Terrain acquired in 2025: 36
  
• Terrain painted in 2025: 61

SCATTER Acquired vs. Painted Tally for 2025

• Scatter acquired in 2025: 115
  
• Scatter painted in 2025: 159