Elephant Grass, Take 2 (Three??)

 

    One of my 28mm Vietnam figures trying to find his way through my 3rd version of elephant grass

My readers here on my blog gave me a thumbs up on my first attempt at elephant grass for my 28mm Vietnam. Over on the Lead Adventure Forum, though, some commenters echoed some concerns that I had about how my first few bases came out. The blades were too wide. It was way out of scale. The stalks of the "grass" didn't mimic what pictures of elephant grass from Vietnam depicted. So, I decided to do a "Take 2."

    Snipping off the cat tail itself, I thought these O Scale JTT scenery products might work

 

The more I looked at the JTT Cat Tails scenics handing from their hooks at Hobby Lobby, the more I thought they might do a better job of looking like grass instead of some random jungle plant. Yes, I would have to cut off the one brown cat tail amongst the green stems shooting up, but that would be easy. I figured that four of them would look right on one of the 1.5"wooden discs. So, I flocked up one of the discs first, then drilled holes with a pin vice where the stems of the plant would go. 

    

    I trimmed off part of the bottom stem & put 5 plants per base, filling the gaps with JTT bushes

After putting four of them a disc, I decided the ground area looked pretty blank and I would need more vegetation on the disk. I added some of the green bushes I used in the first attempt at elephant grass, placed in between each stalk and also in the center of the disk. Next, I added green flocking tufts in the gaps between the bushes. I showed it to Jenny, and she echoed my concern that it looked a little bare. Plus, she said the fact that the cat tail piece went straight up then suddenly flared out halfway up looked odd. It didn't look like long stems of grass. 

    This view from above shows how there are 3 levels - grass tufts, JTT bushes, & the trimmed cat tails

So, on version 2.1 I cut the cat tails down and also added in a fifth piece in the center instead of a bush. I still put the buses in between each cat tail piece and the tufts between them. I liked it a lot better. I dry brushed the tips of the stems the same Maple Sugar that I had done the plastic plants in my first attempt. I showed it to Jenny and she agreed -- definitely better. Neither her nor I were happy about the very "stepped" appearance. You have the flocking tufts that go up a certain height. Next you have the bushes that go up higher. Finally, you have the cat tail pieces which go up more than twice as high as the bushes. if all those stalks were intermixed amongst each other, that might look okay. However, I still wasn't 100% sure this was my elephant grass solution.

 

    I had never heard of 22mm tall grass tufts! I like how lush & dense they are (& easy to make!)

Enter Version 3 -- or at least 3.0, haha! I visited Michigan Toy Soldier with my friend Mike a day or so later. Mike had to go up to Michigan to pick up some painted figures from the amazing Ted Bender. I pitched a visit another hour and a half north to the store as part of the trip, and I'd go along and buy him lunch. He agree. Well, at the store, which has an amazing selection of modeling materials and paints, I found 22mm high tufts from Green Stuff World. Think about that. The minis I'm using for Vietnam are 28mm. These tufts are almost as tall (and would be based on a wooden disk). I took one look at them and grabbed all three blister packs of them they had hanging from the pegs.

    Looking down, you can see how much thicker they are, plus they have a little lighter yellow color, too

I took it to the counter and explained what I was looking for to the store manager. He opened one of the blisters up and I pulled out the painted figure I'd brought along from the Crucible Crush Black Sun range. We both agreed that the flocking looked good coming up over his chest. Honestly, I had never seen a tuft 22mm tall! Actually, Green Stuff World carries four different colors of them. Thankfully, all three they had hanging on the peg were the same color! I picked those up, along with a number of other scenic items. They didn't have any of the miniatures that I was looking for, so I didn't come home with anything but flocking or scenic items.

    I bought mine at Michigan Toy Soldier, but your local shop might be able to order them

For Version 3.0, I simply did my normal flocking job on three wooden discs. Once that was done, I opened up a pack of the 22mm tufts and found that the diameter of each piece was a bit smaller than I thought. I ended up having to put four tufts on each circular 1.5" base. I did the math and the three packs I bought of these tufts would cover 16 bases (4 pieces of elephant grass terrain?). That should be enough for just about any game. I am still thinking of dry brushing the tops of these stems of grass with the same Maple Sugar color. I'm curious to hear what my readers and those on the Lead Adventure Forum think, though.

    One final look at Version 2 -- which do you like best? Version 2 or 3??

    

Which version do you like best? I really want to hear your vote! The original, very tall but broad elephant grass? The stepped Version 2 using the JTT Cat Tails? Or Version 3.0 with the 22mm tufts? Please respond in the comments if you have time -- I would certainly appreciate it!

 

    For those who don't know, here's what it is SUPPOSED to look like...

Meanwhile, what else is on my painting desk? The next batch of orcs (and armored troll) are very close to being finished. You will probably see a post on them within a day or so. I also have more terrain besides the elephant grass that I am working on. I have the crashed spaceship sections primed and ready to be painted on my desk. Once I get this batch of orcs off of the table, I will have room to work on those. So, they're next, then my penultimate group of orcs. Woo-hoo! Almost done with another painting project!!

MINIATURES Acquired vs. Painted Tally for 2026

• Miniatures acquired in 2026: 6
  
• Miniatures painted in 2026: 15

TERRAIN Acquired vs. Painted Tally for 2026

• Terrain acquired in 2026: 0
  
• Terrain painted in 2026: 2

SCATTER Acquired vs. Painted Tally for 2026

• Scatter acquired in 2026: 0
  
• Scatter painted in 2026: 5