 |
| My 1st batch of 28mm Elven spear from Warhost -- I love the Tolkien vibe of these figures! |
I really enjoyed painting the first batch of archers for this project, so I was looking forward to seeing how I fared on the spear. I chose two of the five spear packs (eight figures) I'd purchased from
Badger Games and opened them up. I was happy to see the brass wire spears included, but a bit surprised by the long, elaborate, 3-D printed points to glue onto the tips. This was an extra step that I wasn't crazy about because it was one that I could easily screw up! I think I did manage to super glue them on relatively straight, so the first potential crisis averted!
 |
| These 8 spearmen come from two Warhost packs -- 2 base poses (stabbing & receiving with spears) |
Next up, I cleaned off the flash and attached the shields and spears. I'm glad to see that
Warhost models the right hands as a closed fist. It is a simple matter to use a pin vice to drill a hole into fist and then to use two-part epoxy to glue them into place. There were four poses holding their spear upright and four stabbing downwards with them. As I examined them closer, they seemed to be sculpted in pairs of very similar figures. So, the four stabbing downward had two basic poses wearing the same type of armor, whether scale, banded, or whatever. I liked how they may have a similar look, but still contain slight differences in helmets, vest length, or whatever. However, I would say overall they are less individualized than the archers, but a long way from a 1970s or 1980s mono-pose regiment of figures. Of course, I would also paint their clothes in varying tones of green. So, that would help individualize them even more.
 |
| Among those stabbing & receiving poses, there was a big variety of armor, vest length, etc. |
After priming, I painted the various parts in the same order that I did with the archers. Flesh was first, then armor, inner tunic, outer vest, and so on. Speaking of the armor, that was probably the hardest thing to figure out on a couple the poses. What was armor and what was tunic? I actually guessed wrong at first and had to go back and redo armor on four of the figures. There were also some unique types of armor amongst the spearmen -- one pair of poses wearing a vertically banded armor. It looked almost like lamellar armor that some steppe horseman wore historically. I painted all of the armor types in gold on top of a gunmetal base coat, though. In later batches, I may paint some as dyed eather or linen for a change of pace. We'll see! For now, I'm sticking with the Peter Jackson, Lord of the Rings, elves-in-golden-armor look.
 |
| I have almost 2 dozen greens among my paint bottles & employed a variety of shades on this batch |
For the inner tunics and outer vests, I followed a similar approach as I did with the archers. However, I was more organized. With a Sharpie, I put a number 1-8 on each base. On a notepad, I wrote down what colors I would use for each article of clothing ahead of time. This allowed me to think more about which shade of green I would use for the lighter inner tunic and which darker shade I would use for the vest. For the decorative lining on the vests, I also tried to use color combinations that were a little more subtle and less high contrast. I was worried that the contrasting colors I chose for some of the archers may have looked too
busy. I examined the first
batch closer, noting which patterns and color combinations I liked. Hopefully, the spearmen's vest decorations turned out a tad more subdued. I
imagine this will be something I get better on as I progress through this army.
 |
| I tried to make the decoration on the vest hemlines more subdued this time - I like how they look! |
Writing my proposed colors for each figure also helped me keep track of where the armor was on some figures because it wasn't always easy to tell. For example, I was fairly certain that five of the figures were wearing leg greaves, while the remainder looked like they were wearing trousers. Or were they? After I was done, I thought maybe the trousers could just have been greaves whose top was simply covered up by a longer vest. D'oh!! I did not go back and repaint them as greaves, though. I also noted for each numbered figure which had armor popping out tunics onto their shoulders, for example. It kept me on track more and reduced instances of going back and redoing parts!
 |
| Wood elven spear assemble near an ancient pavilion deep in the woods, ready for battle! |
For the equipment and trousers, I'm sticking with the brown tonal range I used for the archers. When I think wood elves, I typically think green and brown. Shoes I painted in various leathers, browns or grays to fit with what I feel is a sylvan look, as well. My long-time friend Jason asked if I would recreate the shields of my old 25mm Ral Partha Elven army with my Dragon Rampant army. Way back in our brief Warhammer Fantasy days, I had a very cool army of wood elves using the gorgeous, but venerable, wood elves from Ral Partha. Based out of Cincinnati (an hour and a half away), it was the miniature company I grew up on. In that army, each of my mono-pose regiments of elven spearmen had a matching type of leaf design as their shield blazon. For example, the regiment painted in red-brown regiment had a maple leaf. However, with the Warhost figures, there are a variety of shield faces. Three had a number of raised, circular designs or bosses on them. The other five just had a single, central, decorative boss. I felt it would be too hard to use the exact same blazon on the two different shield types. So, I made the decision to make each shield different. I did some Google Image searches of leaves and their colors, and saved my favorites.
 |
| Shield closeup for you, Jason! Homage to my 25mm Ral Partha wood elf army, sold long, long ago... |
I am planning on fielding most of my elven infantry in units of 12 Light Foot armed as "Mixed weapons" in Dragon Rampant. This means they are equipped with both melee and ranged weapons. I plan to mix a relatively equal number of archers with spear or sword-armor elves in the units. Next up, was the elves' long, flowing, rock star hair. I liked how the four different shades of blond I used on the archers turned out. So, I duplicated it here. I also liked the very dark blue for the center dot in their eyes. Previously, I would often use lighter shades of blue or even gray on some miniatures. However, I've come to the opinion that these eye colors often seemed to get lost on the face. Tthe figure would end up with an almost glazed look. So, lately I've been using a very dark brown for the eyes of most of my figs. These are elves, though, so I went with dark blue. I like how it looks.
To be honest, though, I would say that my batting percentage on painting a perfectly good eye is about 50-75% for each batch of figures. I like how half or more come out, but am not crazy about a certain percentage of each it seems. I know there are many good miniature painters -- more skilled than me -- who eschew painting eyes. However, I found early on, when painting a 15mm army of Ancient Picts with tattoos and individual tartan or checkered patterns, that doing precise details like that but leaving the eye sockets blank looked...well, weird. Almost like they were creatures who had no eyes at all. I know some folks go by the "six foot rule." Unfortunately, though, people pick those figures up and hold them up more closely than six feet to examine! Plus, with my close up photos of each batch of figures, I am zooming in WAY closer than six feet! So, the "eyes" have it!!
 |
| Final look at these excellent Hobday & Hicks sculpts -- I am very happy with how they turned out |
To touch on something I mentioned in this post early on, I am a bit concerned about the 3-D printed elaborate spear heads. Being spear points jabbing at an imaginary enemy means they naturally stick out. Will they 3-D printed points snag on things, or be dropped and snap? I guess we will see once the elves start making an appearance on the tabletop. I hope that they don't break, because I'm worried that replacing the spear points will be a pain in the butt! If that happens, I will likely trim off the entire point and repaint a new, simpler one directly onto the wire spear itself. I was actually tempted to do that anyway when I began assembling this batch. I decided to bow to the wisdom of the figure sculptors, though, and give the points a try! So, cross your fingers and stay tuned on how that turns out! Speaking of Hobday & Hicks, I was very flattered and grateful for their praise of the first batch of archers both on this blog and Facebook. Thanks, guys -- I truly appreciate it!
What else is on my painting desk at the moment? Well, prior to leaving for Cincycon last week, I got out five of my seven ABC Robot Warriors that I'd won in a raffle a couple years ago. They were soft plastic figures that were a royal pain in the butt to glue together. Superglue didn't really work, modeling cement didn't, and neither did two-part epoxy. I swear that some of the folks designing miniatures are frustrated military modelers of days gone by! Anyway, I figured some could be used as big alien monsters for my Majestic 13 games. Once I got them all glued up and had a close look at them, I was wishing I'd picked a different batch of figures to paint...haha! Esepcially after I bought all of those more appropriately big alien monsters at Cincycon! That would be cheating, though, on my 2026 vow to alternate older figures with this year's purchases. So, I've been soldiering on and working on these not-as-simple-as ABC figures simultaneously with the elves. Stay tuned to see how they turned out -- I will likely finish them next week.
MINIATURES Acquired vs. Painted Tally for 2026
- Miniatures acquired in 2026: 159
- Miniatures painted in 2026: 60
TERRAIN Acquired vs. Painted Tally for 2026
- Terrain acquired in 2026: 3
- Terrain painted in 2026: 21
SCATTER Acquired vs. Painted Tally for 2026
- Scatter acquired in 2026: 16
- Scatter painted in 2026: 48
No comments:
Post a Comment