Two Styles of Acheson Creations Barricades Painted Up

    Concrete barriers from Acheson Creations manned by some of my post-apocalyptic survivors

My favorite terrain manufacturer for many years was Acheson Creations. Through my decades of miniature gaming, I've bought many buildings, walls, scatter terrain, and more from this company, which unfortunately has stepped back from active production. There are a few companies out there, such as Miniature Building Authority, that carry some of their scatter terrain. Another was a regional vendor at local conventions, Armory Hobbies. At Drums at the Rapids this May, he also decided to hang up his business and was selling his remaining Acheson products at 50% off.

    I got 8 of the barriers for 50 cents each -- an awesome deal from a vendor going out of business

I snagged two types of barricades up there, among other items. I figured it was time to get them ready for the tabletop. I had no pressing need for them in an upcoming scenario, but these concrete barriers and tire and oil drum barricades are generic enough they'll fit with just about any modern, post-apocalyptic, or Sci-Fi period. The one thing you have to know about Acheson Creations products when painting them, though, is to beware the very strong mold release agent. I have always been able to remove it by placing the pieces in the dishwasher and running them on a quick cycle. This time, I made the mistake of not adding soap because we had switched from the powdered to the "pods," and I didn't want to use up a full pod. As Short Round said in my favorite quote, "Big mistake, Indy!"

    Concrete barriers can be used in various modern, post-apocalyptic &  Sci-Fi games -- you name it!

I detailed that a couple posts back when talking about the Acheson Sci-Fi building I had painted. Once taking them out of the dishwasher, I spray painted them with Krylon Fusion Acrylic Matte Black. I followed that up with my usual 50/50 mix of acrylic black paint and water. However, I noticed quickly that any light scratch or rough handling of the barriers was removing the black layer. D'oh, not again! I touched them up and decided to be even more careful handling them during the painting progress. I would definitely NOT be using the same clear coat sealant on them as I did on the Sci-Fi building!

    What are the barriers keeping out? Zombies? Rival gangs? It's up to you and your scenario...

Anyway, painting the concrete barriers was easy and quick. I did a medium to dark gray wet brush, then a lighter gray dry brush. I went over them with my black wash, and then did the bases my usual brown ground color. I painted the surface of the ground with white glue and then sprinkled on Woodland Scenics Blended Earth Turf. After it dried, I did a couple green grass patches and glued in some clump foliage, as well. I went back and forth whether to put graffiti on the barriers. However, I felt this would make them a bit less generic, so decided to keep them plain. Finally, rather than spray sealant on these pieces, I painted them and the flocking with a 50/50 mix of white glue and water. Hopefully, that does the trick on protecting them from wear and scratches!

    I bought six of the tire and oil drum barricades at Drums 2024 - should I have bought more?

The tire and oil drum barriers took a few more steps, of course. I prepped them exactly like the others (yes, they were in the same dishwasher batch as the Sci-Fi building and the concrete barriers). Once ready for the brush, I did a wet brush of a dark gray over the tires. I followed that up with a medium gray dry brush. Finally, I painted the rims on the tires in Iron Wind Metals Steel. 

    It was a great idea to design these pieces as Acheson did -- they look realistic and convincing!

Switching to the oil drums, I pulled out six colors: pale blue, pale green, Parchment Yellow, terra cotta, tan, and a lighter gray. I did the math. There were four oil drums on each barricade piece and six pieces. That's 24 drums to paint. So, I used each color on four drums -- never using the same color twice on a single section. I tried my best to mix it up, so the green and blue ones weren't always together, and so on. I let them dry overnight and then dry brushed them in an appropriate lighter color.

    I was happy with the rust effect on the oil drums -- these are very handy and versatile terrain pieces!

Finally, it was time for a rust effect on the drums. I pulled out my brown Rust color (appropriately enough), and did various splotches and speckles and lines of rust to match what I saw in some Google Image searches. Once dry, I used my bright international hunter orange and dabbed specks of it inside the rust. Finally, the drums and tires got a black wash. This was followed up by flocking them with just the blended turf. Both the flocking and the paint was sealed in with a 50/50 mix of white glue and water. I'm thinking this worked. I believe I have averted the disaster of not sufficiently getting rid of the mold release agent before painting.

The pieces look great on the tabletop. It was nice to be painting Acheson products, again. I understand Craig Acheson's desire to retire -- heck, I'm retired! I just miss his excellent, easy-to-paint, affordably priced terrain...!

What's up next? I have six 28mm Sci-Fi figures that I have begun sitting on my desk right now. They're meant to be random figures that could be used by a number of factions. They're definitely unusual figures, so I'm looking forward to how they turn out.

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 226
  
• Miniatures painted in 2024: 208

Zombie RV: Exploring the Creepy Farms for Halloween

    Zombies chase survivors at 'Creepy Farms' -- a game with 6 players and 12 survivors on table

I had been wanting to run a big game of Zombie RV with all the players on the same board. Halloween being this week was a perfect excuse! I set up a countryside board this time, centered on two creepy (zombie-infested) farmsteads. We had a great turnout in my friend Mike W's downstairs "Brewpub" at this house, while the ladies partook of a Halloween-themed charcuterie upstairs. I had six players, including the return of our good friend Tom. It was great to drink beers and game with him on a Sunday evening, again. Welcome back, Ptomas!

    An overhead look at the 'Creepy Farms' table, with the locations of objective markers circled

The board was 5'x3', bigger than the three, individual 2'x2' areas we used last time we played (see Zombie RV Times Three). What difference would the 15 square feet vs. 12 make? Honestly, I wasn't sure! I thought it would be less compartmentalized and the players would feel more like they were all in the same mission,  and hopefully cooperating. I established two spawning points along the center line of the board, 18" in from each side edge. I represented the spawn point as the doorway to the farmhouses. Apparently, the local families had holed up inside and the zombies had broken in and were feasting on them. Lots of zombie feasters...as well as feasted-upon family members! Honestly, I think "spawn points" are one of the hardest things to rationalize on a gaming table. I can see when it is a board edge or street corner leading off-table, or something like that, but something in the center of the board requires just a wee bit of suspension of disbelief. Think of it as watching a play. A zombie play!

    Daisy & Coop leave the RV and set off to scavenge for supplies at the zombie-infested farmsteads

However, I was throwing in a twist in this game. Since each player controlled two survivors, there would be 12 total characters. That's equal to three, 4-survivor groupings in the base Zombie RV rules by David Bezio. My third spawn point would be completely random each turn. Each zombie arriving from that spawn roll would then have a separate calculation to see where on the board edges they would arrive. I divided the perimeter of the board edges 12" lengths and numbered them #1, #2, etc. We would roll to see which point we would start at for that particular Ordinary zombie, Fast zombie, or Nasty zombie,. This was followed by a d12 roll to see how many inches counter-clockwise from that point along the board edge it would be placed. 

    Jackie and Wrich set off to explore the ruined stone cottage looking for some supplies to scavenge

Afterwards, I asked the players if having to worry about zombies showing up behind them was too devastating and they all agreed it wasn't. The players get a movement after the spawning and before those just-spawned zombies move. So, they could clear out if a nasty zombie showed up just inches away -- which did happen. Ask Joel's "Earle" character, who spent most of the game running, it seemed!

    Meanwhile, the first set of zombies at the spawn point become restless and head toward the survivors

The players as a group would also start on a board edge, specifically either (or both) of the two long edges. I gave them up to three vehicles to "arrive" in. They would place the vehicle on either of the gravel roads running along the long edges of the board, and all their characters much start the game in contact with their particular vehicle. I gave the players some time to talk strategy, first pointing out all the objective markers on the board, what was difficult terrain, and so on. Although Tom tried to engage them in a tactics discussion, the group spent less than a minute doing so. NOT an auspicious start! Anyone who has played Zombie RV probably knows how cooperation amongst survivors is key to success. This dirty dozen's mission was to successfully grab at least eight of the 10 objective markers and then get off-table for the "win."

    Junior and Roman cross the ditch beside the road on the footbridge to investigate the veggie stands

As it was, they split up into three groups of four -- just like in classic Zombie RV. Mike W and Allen began on the near corner, not far from the pond. Keith and Joel began in the center, where the burnt out wreck blocked the driveway. On the far side of the board, Tom and Mike S parked my new RV model next to the toppled over truck blocking the other driveway exit. And then they scattered! Yes, they were spreading out to snag as many objective markers as quickly as possible. However, it seemed there was little cooperation or communication. Mike S turned his guys away from the shed he was heading towards once he saw that Tom's guys were going to get there first. Keith darted off down the road to the footbridge leading across the ditch which ran alongside the road. Allen's boys meandered towards the pond while Mike W's survivors split off from them towards the ruins of the old stone house. It seemed like it was every pair of survivors for themselves and -- crucially -- no group really close enough to the others to support them if they ran into trouble.

    After leaving the RV, Red and Mophius sneak inside the shed to find more supplies

Allen's Big Bass and Benny drew the attention of the zombies first. Benny drew the short straw and got to wade through the green water of the pond towards where a boat was tethered. There were a couple closed bins on it that looked promising to Allen. Oh, a side note on game mechanics: the players know the location of the objective markers. I marked them with pumpkins for this game! However, they must make a successful "Brains check" to actually find the items there. A Brains check is a d6 roll added to the character's Brains stat, which could be 1, 2, or 3. Guess what Benny's was? A "1"! Now we know why he drew the short straw! "Sure, Big Bass. I'll wade out there and search the boat if you say so." 

    Big Bass and Benny survey the farmstead before heading down the road and across the ditch

Meanwhile, Keith rolled an extra action for Roman (not "Moe" or "Schmoe"...ha, ha!), who was able to hustle down the road, across the bridge, and to the marker next to the farmer's fruit and vegetable stands. Roman is no dummy and successfully snagged some supplies. In the center of the table, Jimmy also had rolled an extra action and tiptoed quietly through the ditch, over the fence, and into pumpkin patch. He also found some supplies (probably some unharvested veggies which he quickly tossed in his backpack). Joel's other character, Earle (not Darrel!) crept along the same fence line towards the second cabin. The zombies who'd been clustered near the door ignored him and shuffled towards Big Bass and Benny, as did the ones from the opposite farmhouse.

    After popping off a couple shots at zombie horde, Earle soon decides to run back to the road

Annoyed at being deemed insignificant and not a threat, Earle popped off a rifle shot and splattered the head of the nearest zombie. That'll teach them, he thought. This changed their trajectory, as the horde quickly hurried towards him, as did the next batch to spawned by the farmhouse door. They ignored Jimmy in the pumpkin patch, who breathed a silent thanks to his friend Earle's bravery. Earle proved that bravery by promptly firing one more shot then bolting back to the gravel road and behind the ditch. Jimmy felt he owed his friend one, though, and raised his pistol and splattered a zombie pursuing Earle. He then hightailed it through the pumpkin patch, vaulting the fence, and entering the cornfield. He was joined by Junior and Roman, who pointed back towards the footbridge. A randomly spawned zombie had appeared on the road next to the bridge and was crossing in slow pursuit of the pair.

    Meanwhile, the zombies keep coming -- a minimum of 3 from each of the spawn points each turn

To the left of the pond, Mike W's Jackie and Wrich located the supplies and found some extra ammo. Jackie began the dangerous trek past the water tower and towards the other cornfield, all alone. Wrich wandered towards the farmhouse, took aim, and shot a zombie that was shuffling towards the pond. On the next turn, thrilled to see the zombie's head explode, he squeezed off two more shots. Two more zombies went down. The mob heading towards the pond ignored him because Big Bass was busy blasting away with his shotgun with both his actions. Meanwhile, Benny was puzzled by the latches on the bins. They appeared to be locked or resisting his efforts to pull them open. 

    Junior & Roman are surprised by a zombie spawning on the road behind them & dart into the corn!

Although Wrich was out of sight of the door to the farmhouse, the zombies who had just spawned there heard his gunshots clearly. Unfortunately for Wrich, one of those zombies was a Fast zombie. The whole crew spilled around the corner towards the surprised survivor. Wrich was even more shocked when one ran fast enough to come into contact with him. Uh-oh. Things were about to go south in a big way for our host's survivors!

    The zombies chasing Jimmy, Junior, and Roman wade into the cornfield, hopelessly slowed down

On the far side of the table, Tom's survivors were able to locate and secure the objective marker in the shed. Red and Mophius did a great job playing cat and mouse, staying out of sight of the zombie spawning points. Meanwhile, Mike S's Coop and Daisy headed the other direction towards another fenced field near the corner of the board. They also stayed out of sight as best they could. Unfortunately, that meant by far the bulk of the zombies headed towards the near side of the board and Big Bass and his friends. One group of zombies chased Jimmy into the cornfield, but had little chance of catching him. The rest all seemed to converge on the pond, or on Wrich. Jackie stopped her trek towards the far board edge and came back to help her friend, but she missed with her pistol fire more often than not. 

    Too far from the others, Jackie & Wrich are swarmed by zombies, including a deadly 'Fast zombie'

The Fast zombie had wounded and knocked Wrich down. Amazingly, though, he was able to use the medicine he was carrying, heal himself, and back up one move. However, that wasn't enough distance when facing a runner! She caught him again and knocked him down and wounded him once more. This time, some of the ordinary zombies were able to catch up, too. In our experience, when a survivor is wounded, knocked down and surrounded by zombies, he's dead meat. Wrich fought for his life desperately, though. Jackie waded in and tried her best to help him targeting the zombies with her pistol (and unfortunately, continuing to miss more than she hit). However, Wrich eventually was taken down. Jackie got too close, and was also caught and eventually killed, as well.

    Mophius faces off against a horde of zombies, while Red is wounded & knocked down by a Fast one

Far away on the opposite side of the board, Junior was doing a much better job using the cornfield to keep distance between him and the zombies. When random zombies showed up on the board edge near him, he blasted them effectively with his shotgun. Between Junior and Big Bass, they probably killed three quarters of the zombies I was putting back into my magnetized box as quickly as I was taking them out for spawning! Jimmy hung out with Junior and Roman, and the three eventually linked up with Coop and Daisy, who had not really accomplished much. Two pistols (Daisy's and Jimmy's), a rifle (Coop's), and Junior's shotgun were unfortunately all far, far away from where their companions were being swarmed and overwhelmed. 

    Daisy & Coop call for the others to head back to the RV while Red tries to fight off the Fast zombie

Big Bass and Benny ("Hey Bass, it's like these bins are tugging back on me...! I can't get them open!!") were about to be inundated with zombies slowly slogging through the pond. Big Bass was magnificent, though, firing blast after blast with his shotgun. He never rolled the dreaded natural one on his attacks, though, meaning he was out of ammo. I have ruled that since the shotgun fires in a cone and allows you to attack multiple targets, you are out of ammo only if the natural one shows up on your first roll of that cone. Zombie after zombie went down in the pond, sinking to its green depths. Earle was slowly backing up towards the duo, though, calling to them, "Nasty zombies, guys! Big ones! Coming our way. We gotta go!!" This was followed by Benny's surprised shout. One of the bin's had finally come open. Inside was a man who had been trying to hold it closed against Benny's tugging. 

"Man! I thought you was zombies!! You scared da crap out of me!" The survivor, who they'd later learn was nicknamed Curly for his bald, black head, leapt out of the boat into the pond, wading desperately towards the shore, away from the horde of zombies in the water. Benny followed him towards the gravel road, as did Big Bass. Earle zipped by all three of them, firing one final shot behind him. A pack of zombies were on his heels, including two Nasty zombies in the lead.

    Things look grim for Big Bass - out of ammo, wounded twice, and facing two Nasty zombies

Big Bass cocked his shotgun again, shaking his head and planting his feet. "Muthaf...BOOM!" He blasted away at the pack of zombies, again and again. His friends called to him to run, but Big Bass refused. The shotgun boomed out again. Suddenly, he was down and wounded. Still he raised his shotgun and aimed, "CLICK!" After being reliable all game and never running out of ammo despite the odds, Allen finally rolled a "1". Big Bass continued to fight, though. His friends had seen enough. They darted for the van to escape.

Across the table, a similar scene was played out. Tom's two characters were both in contact with zombies. Amazingly, Mophius was able to break away and make it back to the RV. Unfortunately, Red (not Trunk Monkey!) went down. A Fast zombie caught him, and when the ordinary ones caught up with the downed and wounded survivor, it was a brutal end. As three vehicles spit gravel as they pealed out, putting distance between themselves and the creepy farmsteads, silence soon returned to the area. The screams had stopped and the only noise was the sibilant, sickly sound of zombies feeding on fresh human flesh.

Roughly two and a half hours after we'd begun, it was over. My big game experiment with Zombie RV seen one of the highest percentage of survivors lost (33%) in any game so far. Had I made the game too difficult? I don't think so. In my opinion, a lack of cooperation had doomed the survivors who died. Wrich and Jackie were far away from any other survivors. So, when they hit their first setback, no one was there to help them out. Similarly, when Red went down, there was a lot of firepower unable to help him. Big Bass' end was probably a foregone conclusion. He had defied the odds all game long, dispatching hordes of zombies. He simply held his position too long. Benny took too long getting the objective marker, and Big Bass stood when he should have ran. 

I liked the big battle version of Zombie RV. Hopefully the players did, too! I will give them their experience points and let them buy new skills or improvements for next game before we try again. Feel free to comment below if you have questions about my additions to David's excellent rules. Oh, and Happy Halloween!!

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 226
  
• Miniatures painted in 2024: 208

Hopefully, These are the Droids I'm Looking For...

    A dozen droids from various manufacturers, including a few scratch-built from scatter terrain

As I gear up for running Star Wars themed skirmish games, there was one thing I was certainly lacking: droids. Not war bots and military stuff like that -- I had painted up a good number of those already. I'm talking about the civilian type ones like C3PO or R2D2. They didn't have to be copies of those two. Any unarmed, robot or droid-like figures would work. Remember the scene inside the Jawas vehicle when those two were captured during the first Star Wars movie? There were LOTS of different sizes and shapes, so I felt I had a relatively free hand.

    Remember the 'Walking Trash Can' droid from Star Wars? Here's my version of 'Gonk'

One source was the Retro Raygun line from Hydra Miniatures. On our trip up to the Michigan Toy Soldier & Figure Company, I snatched up three types there. I also picked up some from RRB. Minis & More from the venerable Reviresco 28mm line. And finally, while painting up some of my 3-D printed scatter from Diabolical Terrain, I noticed some of the cylindrical pieces looked very droid-like. They would needed treads or something to give them mobility to be attached underneath, though. Rich Brown of RRB came to my rescue and pointed out stuff in his catalog that would work. 

So, once assembled, I had a very large batch of miniatures to paint at once. I prefer to work on about a half dozen or so at a time, but this was twice that size -- 12 figures. I started out with putting them together. My friend Jason had told me a trick to use with superglue -- have a light dusting of baking soda on one of the halves to be joined together. According to him, it would cause the glue to cure superfast. Since I am so untalented with superglue, I figured superfast superglue might be easier to use. I tried it out when assembling the various arms, heads, etc., together. I did seem to work much faster and hold strong. Thanks for another modeling or painting tip, Jason!

    I took pieces of scatter terrain that looked vaguely like R2D2 and gave them treads

I began with the Diabolical Terrain scatter pieces. I chose the smallest size of three different types of cylinders I'd purchased back at DayCon 2024 in April. I used my hobby saw to separate the bottom quarter or so from the rest of the piece. Only one cut went awry or uneven, but I hoped I could hide it with the RRB treads I would be gluing to the bottom of them. I cleaned up the treads and they were perfect size. They came from three of their Sci-Fi vehicles -- two tank-like ones and one "Jungle Bot." The hardest part was setting them upright for the cylinder to rest upon. Afterwards, I thought "Duh!" I should have glued the treads to the base first! I didn't use superglue for this, I used modeling cement that I have been using for assembling multipart plastic figures. They came out pretty good -- one or two has a gap if you look closely, but all in all, I was happy with how they came together. 

    Good view of the treads which I scavenged from Reviresco bots I bought from RBB Minis & More

I primed them with white artist's Gesso (another Jason tip), because I wanted the main color for most of the droids to be white. It seemed to be a predominant color in the Jawas collection in the movie, at least. Once drying overnight, I gave it a coat of white. I chose to do one accent color on each droid, doing red, blue, and green ones. I also painted the little rectangular panels black and gave them glowing buttons like I did my scatter pieces. I went back and forth whether to give these a wash to dull them up (they were really bright white), and finally decided to go with a dusty brown. After they dried, I gave them a spray clear coat. Upon examining them, I felt they were too dirty, and did a very light white dry brush over the darker parts to brighten them up, again. I know the droids were probably sitting there thinking, "Make up your mind...!"

    Two 'Simon 6' robots from Hydra Miniatures' 'Retro Raygun' line that I liked

Next up were the Retro Raygun robots, Blocko the Squarebot and Simon 6. While assembling these miniatures, I had noticed that the torso and legs of Block looked quite a bit like Gonk, aka the "Walking Trash Can" droid from Star Wars. So, I decided to not glue on the arms or head and have him be my take on Gonk. The others were put together correctly and primed with gesson and given a white base coat. I did the two Simons first, giving one of the red trim on a white body. The next, I left the trim white and repainted the body blue. This reversing of colors has a nice effect, I thought. I gave them a glowing green power indicator in their chest and red eyes. Otherwise, they're painted to be similar in theme to the scatter droids I did first.

    'Blocko the Squarebot' as envisioned by Retro Raygun and then re-imagined as a Star Wars 'Gonk'

Blocko I wasn't sure how to paint. I decided to go with a dull yellow as his basecoat. I painted the arms and legs a pale blue. I guess I decided to depart from the white and trim color theme here because I wanted it to look different than the two Simon robots. I gave him some dark blue metallic trim that I think sets him off a bit. He got the usual lighted yellow, green, blue, red, and white lighted buttons and dials, too. As I was painting him, I felt he looked so retro as to be almost cartoonish. However, once he was done, I was more pleased. After all, C3PO has theose shocked eyes and mouth, too.

    One of the easiest droids to paint up, two of Retro Raygun's 'Hoverbots'

Finally, it was on to the little ones. From Retro Raygun, I picked up a pack of five Hoverbots. Since this batch was so big already, I decided to paint just two of the five. To pick up trash on the ground, I bought a pack of three Reviresco Monowheel Scavengers from RRB Minis. These are pretty cool looking figures, being built around a single wheel, with metallic cover and body. Attached are two robot arms. What really sets them off is their wide open jaw with metal teeth at the front of the robot. I figured these guys buzz around the streets picking up trash and depositing in their mechanical mouths.

    3 'Monowheels' from Reviresco -- I imagine them as rolling garbage collectors scooping up trash

I wasn't sure how to paint them, so did a little bit each time. I began with a gesso and then white base coast. Next, I did the wheel a dark gray rubber. I made the metallic cover for the wheel Iron Wind Steel. I finally decided to use a color for the various trim pieces like I did with Simon 6. I decided the trim would be in normal flat acrylics, but the wheel color would be in a matching metallic color. From being unenthused about them initially, I'm pretty happy with how they came out. Strangely, though, I managed to have one of the blue one's arms come off and have yet to find it! So, I painted over the socket and I have one Mark I version and two Mark II's...ha, ha!

All of the droids and robots got my new Sci-Fi flocking. Rather than putting on Blended Gray fine ballast and then giving it a dark wash, I decided recently to buy a fine black ballast from the local model train supply store. I then dry brush this gray, cutting out a couple steps and using less of my black wash. Add in some brownish tufts and an occasional large patch of stones, and they're done. 

    Another looks at the back of 'Blocko the Squarebot' and my modification of it for 'Gonk'

This batch of 12 took a long time to paint up. I did it in stages, as I mentioned. I'm happy with how they look, though. Will a dozen civilian droids be enough for my games? Wellll, I do have two more Reviresco models I bought, and there are three more Hoverbots. Oh, and I have three more of those Diabolical scatter pieces I turned into droids. We'll see. I'm hoping, as the title of this entry suggests, that these are the droids I've been looking for, though!

What's up next? I am finished with two batches of Acheson scatter pieces. They are barricades made of stacks of tires and oil drums and also tall concrete barricades. As soon as I finish the flocking and take pictures of them, I will put them up here. As far as miniatures go, I'm thinking that the next minis I paint may well be the 'Criminal' faction for my Star Wars skirmishes. Stay tuned to find out!

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 226
  
• Miniatures painted in 2024: 208

Giving Alpha Strike 'Stompy Robots' a Try

    My smaller Mech unsuccessfully plays 'Hide and Seek' with Jenny's bigger one in Alpha Strike

I've been remiss in documenting our gaming sessions, lately. It seems all of my blog posts are about painting miniatures or creating terrain. However, we do game weekly on Sunday evenings. I'd estimate one out of every four sessions is miniatures, though lately we've been doing minis more often. Our host is ambivalent about miniatures and prefers board games, but humors us. Here are some pictures from last Sunday's learning game of "Alpha Strike" -- the latest iteration of BattleTech, I believe.

    Not sure if the game is designed for 8 players, but Andy and Mike S gave it their best shot

Andy S and Mike S both wanted to play it. Keith also had a handful of mechs, which he has run the Wiley Games version (Alpha Suit). However, we used all of Andy's stuff this time. He tried to explain the whole "lore background" or history of the BattleTech universe, but we probably weren't as interested in that. We were more focused on learning the rules. Andy set up a city center amidst a wooded and hilly area, and then proceeded to put all his mechs out on the table for us to choose from.

    My force of 3 Mechs moves towards the cover of the center of town that Andy had set up

We were instructed to take 100 points worth, but not mix "Clan" and "non-Clan." He had a term for the non-Clan mechs, but I can't remember it at this point. I chose three -- a Guillotine, Wolverine, and Commando. The rules were pretty easy to pick up, though Andy had some modifications. He and Mike S went back and forth on deciding how to do the sequence of play. Alpha Strike appears to be a two-player (or at least two-sided) game, and our group doing an 8-player free-for-all probably was going to call for some changes. As usually seems to happen lately, the Wiley Games card activation system was inserted. Since all mechs move before any firing, it was actually an advantage to draw lower value cards and go last (which explains my Ace-King-Queen draw on Turn 1 or 2...ha, ha!

    Once in town, my Mechs go in all around defense try not to expose their vulnerable rear (???)

Andy and Mike made some changes on the fly, including scrapping a weird provision which allows the last moving mech to fire first and then returning to movement order. They said it doesn't matter since all firing is simultaneous, which made me wonder why we bothered to even use the cards to determine order of shooting. It got really weird when one mech wanted to charge another one and enter hand-to-hand combat. Apparently, big stompy robots (or "pilots" in mech suits) still do that far in the future. They ruled that if you charged an enemy mech who hadn't moved it could simply move away and avoid melee on its turn. Hunh?? They searched the rulebook and couldn't find a solution to this conundrum, so that was the way we played it.

    Two of my mechs fire at Jenny's force advancing - our 'cover' proved essentially worthless

All in all, the rules worked. Beginning with your skill value, adding cover and range modifiers, and the enemy's target modifier produced the score you needed on 2d6 to exceed for a hit. Once you hit, Andy's other change was that you roll 1d6 for each damage you would normally score on the enemy. If you rolled a 1-2, it was a miss. Guess what I rolled a lot of that evening? My dice rolling is usually pretty streaky, and tonight it was definitely on a bad streak. By the end of the game, I think I had scored only five total damage points on Jenny or Allen's mechs. Some mechs were doing more than that on just one hit!

I've never really been a fan of big stompy robots, aka Mech games. I will play the game again if they run it, of course. However, it didn't inspire me to go out and purchase the rules or begin buying and painting mechs. Instead of Mechs, it was more "Meh"....ha, ha!

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 226
  
• Miniatures painted in 2024: 200 (see next update)

Stormtroopers, Walkers & an Acheson Building

    A platoon of 3-D printed imperial stormtroopers, supported by some Wiley Games walkers

As part of getting ready for some Star Wars themed Sci-Fi skirmishes, I would have to paint up some stormtroopers sooner or later. A couple CincyCons back, I had bought some 3-D printed ones from JS Wargamer Printing's "Galaxy Far, Far Away" line. I decided to give them some heavy support and painted up three walkers alongside them. These were actually a figure from Wiley Games' resin line of minis called BLST3R. Painted up almost simultaneously was a large Sci-Fi building from Acheson Creations that I had purchased at Drums at the Rapids this past May.

    Painting the black accents on the white stormtrooper armor was a royal pain, I discovered!

We'll start with the stormtroopers. There were 10 figures in the pack with only a few duplicate poses, so that was nice. They came printed with a "slotta" style base, which I despise. I had recently bought a pair of sprue cutters at a hobby store and this assisted in my snipping them free from their bar of shame. I did lose part of the foot of one of the figures while doing so, but was able to recover the figure (unlike with the Mon Calamari). I glued them to plastic round bases with modeling cement and then sat back and pondered how to paint them. 

    I actually had to do a light wash on these figures to be able to SEE the detail to paint them!

As most people know, stormtroopers have white armor, but a black undersuit, as well as black accents on the armor. Do I paint them black and dry brush white heavily? I didn't think that would work. I would cover up too much of the black areas, or not get it white enough, I felt. So that meant I would have to paint them white and paint the black parts by hand. I correctly surmised that it would be a royal pain -- wait, an IMPERIAL -- pain in the butt! However, since I wasn't spray painting these 3-D figures black, it gave me a chance to try out something my friend Jason M (check out his blog) recommended for priming: artist gesso. Jason warned me it seems really thick going on, but shrink wraps around the miniature, looking better in the prepainting stage than it does while applying it. What's more, the gesso surface absolutely grabs the paint and makes it every easy to cover. One coat of brushed on white was all I needed. I was impressed and will continue to use the gesso for figures I would normally prime white. Apparently, they also make a black gesso, so I may pick up a bottle of that, too. I also feel the thickness of the gesso coat may provide similar protection against the brittleness of 3-D printed figures that my normal Krylon spray paint and 50/50 acrylic and water does.

    The stormtroopers and walkers with their coat of Gesso from Liquitex -- I like using this as primer!

    The second squad of five stormtroopers: 'What's that? You two go over and investiage..."

Painting the stormtroopers reminded me a lot of when I did the Bronze Legion awhile back. It was a similar question. Paint the armor first and then do the careful detail to pick out the black joints in the armor? Or paint it black and laboriously do the bronze over it? Both ways were a pain for those figs. Similarly, doing the back was tedious on these stormtroopers. Interestingly, when I went to paint the black, I was struggling to see the detail even under my lighted magnifying glass! It was really hard to tell where to paint the black. So, I improvised and did a very light black wash over the figures first. This pooled in the recesses enough to be able to see what I needed to paint black. After the careful black step was done, I went back and added white highlights to areas where I felt there was too much black wash. Next, were the trooper's blaster rifles (Iron Metals Steel and a full strength black wash). I am happy with how they came out. I am also happy that, considering the scale of skirmishes I am doing, this should be the only batch of stormtroopers that I have to paint!

    The Wiley Games resin walkers come in two pieces, are easy to assemble, and look good, I think

The BLST3R walkers had been assembled (upper half and lower half) and based on round, wooden bases months and months ago. They also got the gesso priming. I decided I would go with white as their base color to match the stormtroopers and give them metallic colored accents. I chose three of my favorites, a deep red, dark blue, and "Christmas Tree" green. I experimented with one first, deciding which areas should remain white and which should get the metallic color. After finishing all three, I wasn't as happy as I thought I would be. I wondered if I should have gone with non-metallic colors? Oh well...too late now! I am definitely NOT going back and painting them, again. Like the stormtroopers, these figures also had a minimum of colors to paint. I picked out a couple areas on the weapon "arms" to paint black and give colored buttons or dials accents on. All in all, I'm happy with how they turned out, too. They are not Star Wars imperial walkers, true. It is a big empire, though. Who's to say the imperial forces did not have walkers similar to these BLST3R models deployed to some planet in the galaxy far, far away? I gave them a watered down black wash to pick out some of the depth and recesses on the miniature. They'll make tough enemies for the rebels on the tabletop!

    The rear of the walkers - you can see the watered down black wash I did on them, too

Once the miniatures were done, it was time to work full time on the Acheson building. I used my favorite Chocolate Brown metallic craft paint as the base color of this interestingly shaped building. I went back and forth over what color to make the "ribs." I ended up choosing the deep, burgundy red metallic because I knew those two colors went together well. The steel plates festooned over the building were painted in Battleship Gray metallic with Pewter highlights. I added bright bronze to a few other places and made the dome a pink metallic. I went with pink because it is in the same color palette as the deep red, I felt. I finished it off with my usual black wash and was very happy at this stage. 

    Large Sci-fi building from Acheson Creations -- I really like the interesting shape and very cool door

And then something unexpected happened! When I used my clear spray coat it caused a crackling effect on the top and some other sections of the building. I had never had this happen before, and am still not sure why it happened. One possibility is that I did not completely remove Acheson's very strong mold release agent sufficiently before I primed it. I normally run it through the dishwasher on a light wash. Did I forget to run this one through? Perhaps. More likely, my decision to not use soap (and the fact that it is a different dishwasher) meant the cycle may simply not have been enough. The crackling effect looks kind of cool, though. I am worried that the bubbling up is going to eventually cause the paint to chip and peel away. We'll see.

    Three quarters view of the building -- I love how the colors all worked out on this

I'm going to try to work on terrain alongside batches of miniatures going forward. Most of the figures will be Sci-Fi, for the time being. The terrain may be a mix, but with an emphasis on Sci-Fi. Right now on my painting desk is about a dozen robots or droids from various sources. These are meant to be "civilian" types -- not war bots like I've painted in the past. In essence, I want them for eye candy or objectives on the tabletop. Stay tuned, and hopefully I'll have another update soon! 

    A close up showing the crackling effect that appeared after I sprayed it will my clear coat

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 226
  
• Miniatures painted in 2024: 196 

Purchases from Advance the Colors 2024

    My acquisitions from ATC 2024 all laid out on my purchased "Frostgrave" snow neoprene mat

Advance the Colors is my local HMGS chapter's flagship convention. As such, it is the "biggie" for me as far as time and effort I put into helping organize and run it. This year, I was the vendor coordinator, flea market coordinator, and all-around assistant for Convention Director Randy Miller. At any convention I attend, I like to support the vendors and make (probably) more purchases than I truly need. However, without dealers at a convention, something is missing, I feel. You need gamers, GMs, and vendors -- the three legs of the stool -- for a truly fulfilling, good con. My opinion, of course!

So, it is no surprise that I spent a lot of money at ATC this year (um...again). I thought I'd do a blog post running down what I acquired at the show. I say acquired rather than purchased because I actually won a couple things in the raffle - woo-hoo! I can pretty much guarantee this will be the last major purchase(s) of the year for me. In fact, it may be my last convention of the year. There's an outside chance I will go up to Fort Meigs in Perrysburg, OH, for World at War, Nov. 1-2. Considering I leave for Morocco less than weeks later, there is a possibility it won't happen, though. We shall see.

    I picked up both of these boxes -- not for Stargrave -- but for my Sci-Fi skirmishes from Shieldwall

Let's talk about the simplest purchase, first. I need some Star Wars style "rebels" for my Sci-Fi skirmishes. I have painted up quite a few things I can use for mercenaries, corporate security, imperial stormtroopers (see next post), criminal syndicates, and even some Mon Calamari ("It's a trap!"). However, I really don't have anything that screams rebellion type figures if I am doing a skirmish in the Star Wars universe (which I want to do). I knew my friend Jeff Gatlin of Shieldwall Gaming carries the Stargrave plastic kits, so I searched online through the various sets on his website. Sure enough, one of the "Crew" sets seemed to fit the bill. Since he's such a great guy, and I wouldn't be purchasing any Saga stuff from him this show, I bought both the "Crew" and "Crew II" boxes. And yes, for some reason, I can actually handle assembling these plastic figures. Normally, I hate putting together multipart figures and avoid them like the plague. However, since I already have successfully done so with the Troopers and one of the Mercenaries boxes I bought from him, I figured (ha, ha) I could handle these.

    A section of my 6'x4' snow and ice or 'Frostgrave' mat I purchased from Griffons Lair

Speaking of Stargrave, which I do not play, I did pick up a 6'x4' neoprene mat for the original game in that series, Frostgrave. I wanted it because it is one of the few types of terrain that I don't have a big mat for. I have jungle, desert, plains, rocky, etc., but no ice. It just so happened that a new vendor to ATC, Griffons Lair from Erie, PA, had a nice selection of mats. I noticed the snow and ice one right away after they finished setting up on Friday. I waited till Saturday to buy it -- probably not wise, in general -- but luckily no one else had picked it up, yet! I know that I won't use it all that often, but it was something I had been looking for to have waiting when I did need one. Remember - I always try to support the vendors at the conventions I attend! 

    My raffle win from ATC -- I know nothing of the game, but thought a couple minis looked cool

Speaking of Griffons Lair, they were the vendor who donated the raffle item that I won this weekend. They are from a game (or line of miniatures?) called ABC Warriors. The tag line on the Warlord Games website says, "Supreme military robots, created for a conflict that ended centuries ago, the ABC Warriors are built to endure warfare in all its deadly forms – atomic, bacterial and chemical.." My friend Mike S pointed them out to me as we were cruising the three tables stocked with raffle donations. I am generally not a fan of "big stompy robots", but who knows? Maybe I could find a use for one or more of these very interesting looking miniatures! Anyway, if you look at the price tags on each box in the picture above, you see how incredibly generous Griffons Lair (and all the other vendors who donated items at ATC), truly were! Thanks, Steven and James -- it was nice to have you at our convention and hope to see you back again next year!!

    More purchases for my Sci-Fi games from RRB Minis & More -- lots of robots/droids!!

Another of my "acquisitions" ended up costing me no cash, as well. I had picked out a few things from my friend Rich Brown of RRB Minis and More's website before the convention and asked him to bring them down. I have a few of his Sci-Fi scatter items painted up and part of my collection. I picked out a few more -- 3-D printed Large and Very Large Habitat pods, as well as a large Arcane Energy Collector. What I really wanted from him were some robot or droid like figures from the venerable Reviresco line of metal miniatures. Particularly, I wanted ones with tracks like the Robot Power Gun I painted up almost a year ago. I picked up a half dozen of these figures. There is a very good chance I will cannibalize one or more of them for their tracks. I plan to paint up/model a variety of droids and robots soon for my Sci-Fi skirmishes, and these are a big part of my plan. Oh, and I say "acquired" rather than purchased because I traded some painted Splintered Light Miniatures for them (see below).

    My purchases from Diabolical Terrain include three large, 3-D printed Sci-Fi buildings

Speaking of my Sci-Fi games, I have picked up quite a bit of scatter for those games from my friend Ron Weaver of Diabolical Terrain. Ron and I regularly give each other grief, but he does some of the cleanest 3-D printing around. You have to struggle and look closely to find any print lines. Normally, they disappear immediately once you prime the model. I appreciate him taking the extra time to print a high quality product. This time, though, I was picking up buildings. I got three relatively large Sci-Fi buildings that wouldn't look out of place on Tatooine for what I feel was a very good price. They will be painted up relatively soon, and will likely be ditching other buildings that were in line ahead of them! In addition, he had some cool Sci-Fi trucks that would look good at a spaceport or something, so I grabbed one of those, too. My final purchase from him was some textured round bases for Sci-Fi figs. Just in case I want to mix things up and use something besides my "asphalt" look, these will come in handy.

    Not exciting looking now (bag of MDF) but these are really cool pieces of terrain from Dad's Armies

Another vendor who made the trip to Springfield, OH, from Pennsylvania was Dad's Armies. Sorry for the lack of a link, but reach out to me in person for an email of one of the owners. I believe they are still working on getting a webstore up and running. Anyway, John and his wife Patty Elbro purchased the Impudent Mortals line back in 2021, I believe. They carry a variety of items besides that line, but I was excited to pick up some of their MDF Sci-Fi terrain. Much of it has of a gritty, industrial look -- perfect for the Star Wars universe. My friend Mike S went to town and bought quite a bit of it. I limited myself to a really cool saucer-shaped building, a Rylos Arctec TL-42 space fighter, a "hopper" flying vehicle, and a leaf punch from Green Stuff World.

    My friend Derek J kindly gave me a couple retirement gifts - modern scatter for my games

The last "acquisition" was a gift from my friend Derek J from Indiana. He and I have a running joke that he's going to steal my scatter terrain off of my tables (especially my tree stumps). In honor of my retirement, Derek (one of the nicest guys you will ever meet at a game convention) bought me a handful of various modern scatter. One box was a Scenics Accents Street Accessories in HO scale. The other looked 3-D printed and includes three soda machines, ice cream cart, dumpsters, trash cans, fire hydrants, and street lights. These are all painted or printed in color and will need only a small base and a dark wash to be ready for the tabletop. Thanks, Derek!

All of these purchases were actually more than paid for, though, by a couple sales of painted miniatures that I made (or delivered) at ATC. I mentioned the Splintered Light Miniatures that I traded to Rich of RRB Minis, above. In addition, a week or so before the convention, I asked him if he'd be interested in my collection of Mice, Squirrels, Raccoons, and Foxes that I had painted up long ago. They were based on large hexagons for a fantasy miniatures rules system that I never got around to writing. I knew Rich played and enjoyed Mice-at-Arms from Grey Area Games (same author as Zombie RV). I figured he might want these to use for that game. Unfortunately, those big hexagon bases of Splintered Light Miniatures have sat on my shelf, unused, for a decade or so. They have all kinds of cool custom banners and are painted to a high quality, I feel. He bought the whole set from me for a very fair price, I felt. In addition, at the show, I let him pick through my individually based Splintered Light animals, and he grabbed enough to offset the RRB purchases I was making from him. Finally, a newer Saga player borrowed my Republican Roman army to use in the Friday tournament at ATC. She had fun with them and I asked her if she wanted to make an offer for them. We agreed on a price. So, like at Historicon, all of my purchases AND my hotel and food expenses were funded by my own sales. Score one for being a (relatively) responsible retiree...ha, ha!

Miniature Painting & Purchasing Tally for 2024

• Miniatures acquired in 2024: 226 (sigh...well, I WAS in the green for awhile!)
  
• Miniatures painted in 2024: 183